Racking Solutions KCCB001 Assembly Instructions

Chrome Kitchen Cart
Please inspect box contents to ensure you have received all components.
Note: the black circular plastic tops in between the shelves are used only for
packaging purposes. They are NOT NEEDED. Please discard responsibly &
keep away from small children.
Total weight capacity of kitchen cart is 225 kg on casters.
HELP LINE
01977 555007

PACKAGE CONTENTS

AX1
Shelf
DX1
extra Slip sleeve
Cart Handle
GX4
Bottom Pole (with threaded
insert pre-installed)
ASSEMBLY INSTRUCTIONS
KCCB001
BX1
Basket Bamboo Cutting Board
EX24+2
Top Pole (with end cap and
pole connector pre -installed)
HX1
Sidebar w/4 Hooks
CX1
FX4
IX4
Casters (2 locking;
2 non - locking)
Information
if in doubt contact the supplier
Please read these instructions
throughly before commencing
assembly.
Inspect all packages for damage and
check that all components have been
supplied
Assembly should be undertaken by
at least two people
!
Caution
During Assembly
Wear appropriate clothing -protective
gloves and footwear are
recommended
Dispose of packaging materials
responsibly
Make sure the floor is level
Allow adequate working space and be
aware of others working around you
Take care when handling heavy items
particularly when lifting or stretching
!
Warning
Rules for safe use of shelving
Not suitable for use in damp or wet
environments.
ENSURE THAT THE MAXIMUM LOAD
CARRYING CAPACITIES ARE NOT
EXCEEDED
Shelves must be loaded evenly, and load
heavier items on the bottom shelves
Never climb or stand on the shelves.

TOOLS REQUIRED

Rubber Mallet