Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Keysight Technologies 423B
Summary of Contents for Keysight Technologies 423B
- Page 1 Keysight 423B and 8470B Detectors Operating and Service Manual...
- Page 2 FAR 27.401 or DFAR 227.7103-5 (c), adhered to, could result in personal injury or as applicable in any technical data. death. Do not proceed beyond a WARNING notice until the indicated conditions are fully understood and met. Keysight 423B and 8470B Operating and Service Manual...
-
Page 3: Certification
Certification Keysight Technologies certifies that this product met its published specifications at the time of shipment from the factory. Keysight Technologies further certifies that its calibration measurements are traceable to the United States National Institute of Standards and Technology (NIST, formerly NBS), to the extent allowed by the Institute’s calibration facility, and to the calibration facilities of other International Standards Organization members. -
Page 4: Waste Electrical And Electronic Equipment (Weee) Directive
To contact Keysight for sales and technical support, refer to the support links on the following Keysight websites: – www.keysight.com/find/detectors (product-specific information and support, software and documentation updates) – www.keysight.com/find/assist (worldwide contact information for repair and service) Keysight 423B and 8470B Operating and Service Manual... -
Page 5: Table Of Contents
............. . 18 Keysight 423B and 8470B Operating and Service Manual... - Page 6 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 423B and 8470B Operating and Service Manual...
-
Page 7: List Of Figures
........16 Keysight 423B and 8470B Operating and Service Manual... - Page 8 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 423B and 8470B Operating and Service Manual...
-
Page 9: List Of Tables
..........13 Keysight 423B and 8470B Operating and Service Manual... - Page 10 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK. Keysight 423B and 8470B Operating and Service Manual...
-
Page 11: Description
Option 012: Furnished with stainless steel type-N male connectors (8470B only) Connectors – The mating RF input connectors used with the 423B and 8470B Option 012 must be type-N female connectors which comply with U.S. military standard MIL-C-39012. – The 8470B (standard) RF input connector must be an 7-mm connector. -
Page 12: Installation
2 If the contents are incomplete, if there is mechanical damage or defect, or if the instrument does not pass the electrical performance test, contact the nearest Keysight Technologies office. Any adjustment, maintenance, or repair of this product must be performed by qualified personnel. - Page 13 Matched detector pair. Frequency response characteristics (exclusive of basic sensitivity) track within ±0.2 dB from 10 MHz to 12.5 GHz; ±0.3 dB from 12.4 GHz to 18 GHz at -30 dBm. Option 012 Furnished with stainless steel type-N male connector Keysight 423B and 8470B Operating and Service Manual...
- Page 14 Sensitivity decreases with increasing temperature, typically: 0.5 dB from −20 to +25 °C; 0.5 dB from +25 to +40 °C; 1 dB from +40 to +55 °C; 1.25 dB from +55 to +75 °C; 1 dB from +75 to +85 °C. Keysight 423B and 8470B Operating and Service Manual...
-
Page 15: Operating Information
50 and 2 k . The larger the resistance Ω Ω the more degradation of rise time. Keysight 423B and 8470B Operating and Service Manual... -
Page 16: Operator's Check
Figure 1 Peak power measurement Reflectometer application For information about reflectometer systems and measurements refer to Keysight Technologies Application Note Index. Copies are available upon request. Harmony frequency comparison measurement application The detector can be used as a mixer in harmonic-frequency comparison measurements. Refer to Keysight Technologies Application Note Index for further information. -
Page 17: Performance Tests
30× °C, the sensitivity slope is typically –0.04 dB/× °C. Match test (SWR) 1 To verify the detector's SWR specifications, use any system whose measurement accuracies for SWR (residual SWR) are known. Keysight 423B and 8470B Operating and Service Manual... -
Page 18: Service
Service The 423B and 8470B does not have internal adjustments and should not be opened; it should only be repaired by service-trained personnel. Should it become necessary to return the 423B and 8470B for repair or service, contact your nearest Keysight Sales and Service Center. Refer to “Sales... - Page 19 This information is subject to change without notice. Always refer to the Keysight website for the latest revision. © Keysight Technologies 2014 - 2019 Edition 3, January 15, 2019 Printed in Malaysia *00423-90103* 00423-90103 www.keysight.com...
Need help?
Do you have a question about the 423B and is the answer not in the manual?
Questions and answers