Download Print this page
SSI Fluid F1000B Installation Instructions Manual

SSI Fluid F1000B Installation Instructions Manual

Pressure balancing valve set with volume control

Advertisement

Quick Links

Limited Lifetime Faucet Warranty
fluid
warrants its faucets to be free from defects in material and workmanship for as long as the original consumer
purchaser owns his or her home. * This warranty applies only in original installation location. If a defect is found in normal
residential use, fluid
will, at its election, repair, provide a replacement part or product, or make an appropriate adjustment.
fluid
reserves the right to examine the product in question and its installation prior to replacement. This warranty is limited
to replacement of defective parts only. Damage to a product caused by accident, improper installation, misuse, or abuse is
not covered by this warranty. Improper care and cleaning will void the warranty. * * Replacement parts can be obtained from
your local dealer or directly from the fluid
warehouse. Dated proof of purchase must accompany all warranty claims. This
warranty applies only to fluid
faucets installed in the United States of America, Canada or Mexico (North America).
fluid
recommends using a certified plumber for faucet installation and repair. Incidental and consequential damages,
labor charges, repair or replacement costs are expressly excluded. In no event shall the liability of fluid
price of the faucet. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation may not apply to you. This warranty gives you specific legal rights which vary from state/province
to state/province. If you find any such problem with your product, please immediately contact your nearest
or sales representative.
Need Help?
For additional assistance
Toll Free: 1 800 460 7019
Fax: 1 604 430 5050
www.fluidfaucets.com
* Two year warranty on commercial applications.
** Never use cleaners containing abrasive cleansers, ammonia, bleach, acids, waxes, alcohol, solvents or other products
not recommended for surface finishes. This will void the warranty.
This faucet meets or exceeds the following standards:
ASME A112.18.1 / CSA B125.1
This product has been tested and certified by IAPMO.
IAPMO LISTED
exceed the purchase
fluid dealer
Sustainable Solutions International
Phone: 1 800 460 7019
www.SustainableSolutions.com
TM
Installation Instructions for
Pressure Balancing Valve Set
with Volume Control
Please Keep This Manual For Future Reference

Advertisement

loading
Need help?

Need help?

Do you have a question about the Fluid F1000B and is the answer not in the manual?

Questions and answers

Summary of Contents for SSI Fluid F1000B

  • Page 1 Limited Lifetime Faucet Warranty fluid ™ warrants its faucets to be free from defects in material and workmanship for as long as the original consumer purchaser owns his or her home. * This warranty applies only in original installation location. If a defect is found in normal residential use, fluid ™...
  • Page 2 Recommended Installation Layout Recommended Installation Layout for Pressure Balancing Valve without Diverter F1001B for Pressure B alancing Valve with Diverter F1000B Hand Shower Only Fixed Shower Only Tub and Fixed Shower Tub and Hand Shower Fixed Shower and Hand Shower Tub Spout Only...
  • Page 3: Tools Required For Installation

    Tools Required for Installation Valve Installation Instructions 1. Shut off cold and hot water supplies. Teflon Tape Screw Driver 2. Make sure to use the enclosed Cutout Template to open the wall properly. 3. This valve must be installed with the cold inlet port(A, marked in blue color) on the right and the Adjustable Wrench Soldering Equipment hot inlet port(B, marked in red color) on the left.
  • Page 4 Tools Required for Installation Trim Installation Instructions Use the Recommended Installation Layout on pages 1 and 2 to plan your trim installation. If the valve has been installed too deeply into the wall and the trim Allen Wrench Screw Driver cover plate can not be installed on the finished wall, please contact the store where Teflon Tape Adjustable Wrench...
  • Page 5 Tools Required for Installation Trim Installation Instructions For Fixed Showerhead Installation: Allen Wrench Screw Driver 1. Make sure 1/2”threaded elbow(#1)is installed securely inside the wall and is connected to the correct outlet of the rough-in valve. Teflon Tape Adjustable Wrench 2.
  • Page 6: Care And Maintenance Instructions

    Care & Maintenance Instructions F1000B Pressure Balancing Valve with Diverter SSI products are designed and engineered under strict quality standards. Regular and proper care of our products will ensure years of trouble-free service. For Integral Stop: To shut off cold and/or hot water going to the valve body, use a medium size flat head screw driver to turn the metal stem of integral stop(#5) clockwise to close.

This manual is also suitable for:

Fluid f1001b-pexFluid f1001b