Do you have a question about the AquaBase and is the answer not in the manual?
Questions and answers
Summary of Contents for AquaPhysical AquaBase
Page 1
• Even surface with space for the AquaBase once it is fully inflated • Area free from sharp objects 2. Next: • Undo strap before inflating • Roll out AquaBase AquaBase Instruction Manual | Company registered in England 9349121 | www.aquaphysical.com | info@aquaphysical.com...
Page 2
Deflating the valve’s in this position. Press on stem and rotate 90° clockwise. stem and rotate 90° anti-clockwise. Important The valve must be in this position before inflation AquaBase Instruction Manual | Company registered in England 9349121 | www.aquaphysical.com | info@aquaphysical.com...
Page 3
• Insert the end of the valve and twist clockwise • Twist anti-clockwise before removing the hose • Inflate AquaBase using hand pump • Pump to working pressure 10PSI or 0.7 BAR AquaBase Instruction Manual | Company registered in England 9349121 | www.aquaphysical.com | info@aquaphysical.com...
Page 4
• It is VERY important that pressure is monitored if leaving AquaBase in direct sunlight Tethering outdoor and indoor • There are two tethering attachment points • Attach supplied bungees. Clip to D-rings AquaBase Instruction Manual | Company registered in England 9349121 | www.aquaphysical.com | info@aquaphysical.com...
Page 5
Bungees Main Tethering Line • AquaBase MUST be tethered 1.5 from the side of the pool and 1m from each other. Very important for Aqua Physical Limited info@aquaphysical.com --- www.aquaphysical.com --- UK: +44(0)8000 190150 --- US: +1 855 410 2040 --- Company registered in England 9349121 Health &...
Page 6
• Care when in shallow water • Do not use in a depth of less than 0.9 metres • The AquaBase must be at least 1.5 metres from the pool edge or any hard obstruction and 1 metre between each other •...
Need help?
Do you have a question about the AquaBase and is the answer not in the manual?
Questions and answers