Polar Electro RMCM-01 General Description Manual

KEY FEATURES
High Filtering Unit
Designed to work well
on constant noise fields
SMD component: To be installed
as a standard component to end
user circuit board.
Working solution with all Polar
transmitter belts
There is a possibility
that one software
modification is required
on training equipment
Differences on reception
range depending the
transmitter used
Receiver coil installation method
improved. Better towards
mechanical noise.
Polar Electro Inc - OEM Division
1111 Marcus Avenue, Suite M15
Lake Success, NY 11042-1034, USA
Tel. +1 516 364 0400
Fax. +1 516 364 5454
Adding Heart to Your Technology
RMCM-01 Heart Rate Receiver
Component
Product code #: 39025074
GENERAL DESCRIPTION
The Polar heart rate receiver component receiver
wirelessly receives the heart rate signal from Polar
transmitter belt. The complete heart rate measurement
system consists of three different parts; transmitter,
receiver and electronics and/or display device that is
outputting the heart rate value.
The transmitter, worn around the chest, electrically detects
the heart beat and starts transmitting a pulse corresponding
to each heart beat. The receiver that is installed on end user
equipment receives the signal and generates a
corresponding digital pulse that is operated on by the end
user equipment electronics.
Following picture illustrates the structure of measurement
setup.
KEY BENEFITS
•
Designed to be used in constant noise environment
• Small size, easy to find a place inside end user
equipment
• Working with all Polar transmitter belts
• SMD component for Pick & Place machine
• Coded and noncoded receiver
Polar Electro Europe BV
Gotthardsstrasse 3
CH-6300 Zug, Switzerland
Tel. +41 41 727 1177
Fax. +41 41 727 1166
Interface to
electronics