Hamilton/Buhl PLCAB4226E Instructions

Instructions
Flat Panel TV Cart
Model #: PLCAB4226E
Warranty begins the date that the item ships out of our warehouse. Metal carts have a
limited lifetime warranty on all housing components; however, carts have a one year
warranty on any electrical/mechanical components.
Note: This unit is easier to assemble with two people.

Parts list

Qty. Description
1 Top shelf
4 Top legs
1 Bottom shelf section
2 Poles for supporting flat panel TV
2 Horizontal mount
1 Electrical bracket
1 Power cord
3 Screws and hex nuts (E)
Pole
Horizontal mount
1.
Insert top legs onto top shelf. Tighten top legs with screws,
washer and nuts (see screw table K) as shown.
3.
Align corresponding holes of unit to obtain desired height.
Qty. Description
9 Set Phillips head bolt, washer and hex nut (I)
8 Set Screw and serrated nut (K)
2 Casters with brakes
2 Casters without brakes
2 Security screws for mounting the poles (F)
2 Security screw (G)
2 Hex head screw (H)
2 Set Pull out shelf
! PROP 65 WARNING: This product
contains the chemical known to the
State of California to cause cancer
and birth defects or other reproductive
harm.
( Instructions continued on next page )
Screw table
Some screws may have already been
screwed on the related parts.
2.
Insert top table section onto bottom section.
4.
Insert two bolts, washer and nuts (see screw table I) into each leg
of table. Washer should be on the inside of leg. Tighten all bolts
and nuts.
PLCAB4226E
Tools required
L key
Adjustable wrench/pliers
Rubber mallet
WARNING:
Please keep
the TV mounting screws
A, B, C & D and the L keys
in a secure location as
they may be required for
use with the flat panel TV
at a later time.