Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for InTouch IT7350
Summary of Contents for InTouch IT7350
- Page 1 Intouch IT7350&IT7340 Version –B User Guide Version 0. 1...
- Page 2 Safety Precautions Make sure to follow the directions below to prevent personal injury, accidents and damage to the product. Warning: To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment, observe the following precautions: Make sure to insert the power plug until it is firmly in place. Do not use a damaged power plug, power cord, or plug into a damaged outlet.
- Page 3 When installing the product on a cabinet or shelf, do not let the front end of the product project beyond its front edge. Failing to do so, may cause the product to fall, resulting in a product malfunction or personal injury. Do not place the power cord near a heater, as the power cord may melt, causing electric shock or fire.
- Page 4 Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's Warning: authority to operate the equipment.
-
Page 5: Table Of Contents
Table of Contents Getting Started..............1 For a slide show as the wallpaper ..........14 Slide Show Control Buttons............15 Package Contents................1 Clock and Calendar ............16 Wireless Internet Frame Overview ........... 2 Setting up the Calendar ..............16 Front panel.................. - Page 6 Setup Windows Live FrameIt Account ......... 52 Factory Reset ................36 Content Service (Framechannel ) ..........54 Show Details................. 36 Account..................55 Motion Sensor (Model IT7350 only) ..........37 Setup Framechannel Account ............55 Screen Taps Sound..............37 Copy/ Delete Photos................ 56 Power Management ................. 38 Copy One ..................
- Page 7 RSS News Reader (RSS2.0) ..........58 Media Setup..................71 Setup Media Playback..............71 RSS News Feed screen ..............58 Add a Station ................72 News Feed List screen ..............59 Edit an added Internet Radio Station ........... 73 RSS News Reader................60 Delete an added Internet Radio Station ........
-
Page 8: Getting Started
Getting Started Package Contents Please check to make sure that the following items are included in the box: Item Quantity Wireless Internet Frame AC/DC Power Adaptor Quick Start Guide Customer Support Contact Sheet CD-ROM (includes User Guide and Warranty Information) -
Page 9: Wireless Internet Frame Overview
Wireless Internet Frame Overview Motion Sensor ON/OFF indicator light (Only for Front panel IT7350) -
Page 10: Back Panel
Back panel Mode button Battery Press to display On-Screen buttons. USB port Insert a USB flash DC power jack drive here that DC 5V / 3.0A contains stored pictures, music and video to access. -
Page 11: Left Panel
Left Panel Right Panel PC (mini-USB) port Connect to PC with provided USB cable. 4-in-1 card slot Reset button Insert a memory card here that Restart your frame contains stored pictures, music, or video that you would like to access. Audio output jack CF (Compact Flash) card slot Connect to external audio output (e.g. -
Page 12: Connecting The Ac/Dc Power Adapter And Usb Cable
Connecting the AC/DC Power Adapter and USB cable DC power adapter Plug the DC power adapter end into the DC 5V/ 3.0A jack on the back of the frame. Connecting USB AC power cord To connect an external USB supported device Plug the AC power cord to your frame, use an USB cable and plug it into a nearby outlet. -
Page 13: General Button Description
General Button Description Icon Button Name Function Submenu button Enter into submenu Select option button Select option Select file button Select file Delete button Delete some setups Keyboard button Input characters More button View more details... -
Page 14: Turning Your Frame On
Turning your Frame on If it’s your first time turning on your frame, or you have reset the frame to factory presets, then you must calibrate the frame, select your language and accept the End User License Agreement (EULA). Standing the Frame up Rotate the frame handle to the desired viewing angle. -
Page 15: End User License Agreement (Eula)
End User License Agreement (EULA) After selecting the language, you must review the EULA To accept the EULA: 1. To accept the EULA, tap the check box next to “I accept the terms in the license agreement”. 2. Next, tap OK. The Home Screen will appear. EULA To not accept the EULA: 1. -
Page 16: The Home Screen
The Home Screen Home Screen Overview Calendar Clock Tap to view calendar. Tap to set the clock’s alarm. Wallpaper area Tap to open the Home Settings screen to change settings to the home display, e.g. change background image or slideshow. WiFi indicator Indicates the network Menu button... -
Page 17: Home Settings Screen
Home Settings Screen Wallpaper Clock Choose a still picture or Choose between a digital or slide show as wallpaper on analog clock on the Home the Home Screen. Screen, and turn it on or off. Calendar Turn the Home Screen calendar on or off. -
Page 18: Additional Home Settings
Additional Home Settings In addition to the wallpaper settings, you can also make additional Home Screen settings: Clock – Allows you to turn the Home Screen clock on or off. Clock Mode – Lets you select the display clock mode (digital or analog) in the Home Screen. -
Page 19: Wi-Fi Icon
Wi-Fi icon The WiFi icon on the Home Screen displays the status of Icons Icon Name Description your network connection. Wi-Fi icon Connection to wireless access point is present. If the Wi-Fi icon is tapped, the screen will jump to the Wi-Fi setting screen. -
Page 20: Wallpaper Settings
Wallpaper Settings For a still picture as wallpaper 1. On the Home Screen, tap the wallpaper area. The Home Settings screen will appear. 2. Tap the button on the Wallpaper line. 3. Tap Still Picture on the pop-up. Still Picture will appear on the Wallpaper line. -
Page 21: For A Slide Show As The Wallpaper
For a slide show as the wallpaper 1. On the Home Screen, tap the wallpaper area. The Home Settings screen will appear. 2. Tap the button on the Wallpaper line. 3. Tap Slide Show on the pop-up. Slide Show will appear on the Wallpaper line. -
Page 22: Slide Show Control Buttons
When playing slide show in Home setting, user can control to move to next picture by shaking his hand in front of the sensor. Tap the screen, the control button will appear. Motion sensor is effective either when slide show is being played or being paused (Only for IT7350). -
Page 23: Clock And Calendar
Clock and Calendar Setting up the Calendar 1. On the Home Screen, tap the button. 2. Next, on the Main Menu screen, tap the Settings icon. 3. Then on the Settings screen, tap the button. 4. The Settings > Date / Time screen will appear. Set the Date Main Menu screen 1. -
Page 24: Calendar Preview
Calendar Preview On the Home Screen, you can tap the area outlined in red to switch between the Date Display and the Month Display. Using the Calendar preview On the Home Screen, tap the Calendar to view in full screen. The calendar will be displayed in the day or month mode depending on how it is set in the Home Screen. -
Page 25: Set The Time
Set the Time On the Time line, tap to open the Date / Time > Time screen. Tap the up and down arrows to set the hour, minute, and AM / PM. Tap Yes to save the settings or No to cancel the settings. You will be returned back to the Settings >... -
Page 26: Setting Up And Using The Clock Alarm
Setting up and using the Clock Alarm To set an Alarm You can set up to a maximum of four alarms. Open the Clock On the Home Screen, tap the Clock to view in full screen. On the Home Screen, tap Menu. Main Menu screen appears. Tap Clock Tools icon. -
Page 27: To Change An Alarm
12. To set the alarm tone, tap the button on the Alarm Tone line. 13. A pop-up will appear. Select which tone you want from a list of 5 alarm tones. 14. Back on the Alarm Settings >Edit screen, tap Yes to save your alarm settings or No to cancel settings. -
Page 28: Frame Tools
Frame Tools Main Menu 1. On the Home Screen, tap the button. 2. The Main Menu screen appears. From here, you can enter the different applications the frame has to offer. Photo – tap to open the Photo application. News – tap to open the RSS News Reader application. Media –... -
Page 29: Keyboard
Keyboard The Keyboard is used throughout the frame as a means to enter information such as titles, names, etc. It is based on the QWERTY layout used on standard keyboards. As you type in your information, it will be displayed in the top half of the keyboard. button –... -
Page 30: On-Screen Display Bar
On-Screen Display Bar Use the On-Screen Display bar to easily navigate between applications without closing a running application and to have easy access to key settings like brightness, volume control and screen lock. Open and close the On-Screen Display (OSD) Bar Open the OSD Bar by pressing the MODE button on the back of the frame. -
Page 31: Adjust Lcd Brightness Using Osd Bar
Adjust LCD Brightness using OSD Bar Tap the icon once to open the LCD Brightness OSD buttons. Tap the icon or icon to adjust the LCD brightness. Night icon: Adjust to this level for a darker environment. OSD Bar – Brightness selected Sun icon: Adjust to this level for a brighter environment. -
Page 32: Settings
Settings On the Home Screen, tap the Menu button. The Main Menu screen appears. Tap on the Settings icon. The Settings screen appears. Network button – configure your wireless network Date / Time button – configure the Home Screen clock and calendar Display button –... -
Page 33: Network
Network Notes: 1) The frame does not support Hotspot login or web browser internet login. 2) Please make sure the Wi-Fi network is connected successfully before you use any network related applications, e.g. Web Photo, Internet Radio, or RSS News Reader. Setup Wi-Fi Network - Access Point’s DHCP settings is On and the AP SSID is not hidden On the Setting screen, tap the button. - Page 34 button to bring up the Keyboard and type in the network key. Step 5 will be skipped if connecting to an unsecured network. to confirm. A “Connecting…” dialog box appears. After successfully connecting to the access point, you should see a green WEP Security Setting box checkmark icon next to AP SSID name.
-
Page 35: Setup Wi-Fi Network - Access Point's Dhcp Settings Is On But The Ap Ssid Is Hidden And No Encryption Key Is Needed
Setup Wi-Fi Network - Access Point’s DHCP settings is ON but the AP SSID is hidden and no encryption key is needed Note: 1) Follow these steps ONLY if your AP SSID name is hidden. If you are using a Wi-Fi network other than your own, then you must consult the Network Administrator for that network to get access (i.e. -
Page 36: Manual Edit Wi-Fi Network Screen
On the Search WIFi Network line tap to open the Network Search screen. You should see the newly entered Wi-Fi network name. 10. Tap Connect button to connect the newly added Wi-Fi network. Manual Edit Wi-Fi Network Screen On the Setting screen, tap the button. -
Page 37: Advanced Settings
Advanced Settings Notes: 1) Follow the steps of Advanced Settings ONLY if your access point’s DHCP setting is OFF. The frame needs to use a fixed IP address to connect to the AP. 2) If you are using a Wi-Fi network other than your own, then you must consult the Network Administrator for that network to get access (i.e. - Page 38 If the access point has a network key, the icon will be displayed. On the SSID Name line for the network you want to connect to, tap Connect. If the access point has a network key, the user will be prompted by a pop-up screen to input the network key.
-
Page 39: Date / Time
4) If you are using a Wi-Fi network other than your own then you must consult the Network Administrator for that network to get access (i.e. network key). Date / Time See the Clock and Calendar section for instructions on the Date / Time settings. Display On the Settings screen, tap button to enter the Display Screen. -
Page 40: Auto Playback Demo Video
Tap the Play icon to resume demo video playback. Tap the Back icon return to Home screen. Note: If the user deletes the” Intouch Video Demo “in the media application, the function of “Auto Playback Demo Video” will be disabled. -
Page 41: System Settings
System Settings On the Settings screen, tap the button to enter System screen. Language On the Language line, tap the button to open the language pop-up. Next, tap on the desired language. Available languages are: English System screen French Spanish German Italian Dutch... - Page 42 If there is a newer firmware version available, the dialog box appears asking "Do you want to upgrade now?" to download the new firmware and the frame will start downloading the new firmware. to cancel the download. You will be returned to the System screen.
-
Page 43: Factory Reset
Factory Reset On the Setting screen, tap the button. A pop-up dialog box will appear asking "Do you want to reset factory settings?" to reset the factory settings or to cancel the reset. You will then be returned to the System screen. Note: Please do not Power Off during factory resetting! Show Details System screen... -
Page 44: Motion Sensor (Model It7350 Only)
Tap the button to return to the System screen. Motion Sensor (Model IT7350 only) You can turn the Motion Sensor on or off using the buttons on the Motion Sensor line. If user selects [ON] In Home Slideshow and Photo Slide show: When playing slide show in Home screen and Photo Application, user can switch to next picture by shaking his hand in front of the sensor, and there will be a “tick”... -
Page 45: Power Management
Power Management The Power Management screen is where you can set the Sleep Mode and Interval Time. During the sleep time, the frame will be turned off to save power. The alarm is still active during sleep mode. To wake up the frame press the Mode button on the frame's back panel. -
Page 46: Battery Profile
Battery Profile If the unit does not have a rechargeable battery, the unit will be powered by AC adaptor. On the Settings page, tap the button to open the Battery Profile Settings screen. On the Power Save Mode line select either ON or OFF. On the Turn Off Backlight line, tap the button to set the time limit for the Battery Profile Settings screen... -
Page 47: Photo / Content Service
Photo / Content Service The Photo Player application lets you view, add, delete, and configure your photos. Photos can be viewed in a still picture or slide show configuration. You can store photos internally to the frame, access them from an external disk or flash drive, another PC on your home network, or from a photo hosting/sharing web site. -
Page 48: Photo
displays photos stored on an external disk or flash drive displays photos stored on another PC or server on your network display photos stored on a photo hosting/sharing web site Photo Player Main screen (left sidebar closed) Photo 1. To open the Photo Player application, on the Home Screen tap the Menu button to open the Main Menu page. -
Page 49: Zoom Control Buttons
Tap the screen, the control button will appear. Motion sensor is effective either when slide show is being played or being paused (Only for IT7350). Zoom Control Buttons Actual size button – display actual size of the picture... -
Page 50: Disk
Disk 1. On the Photo Main screen tap on Disk to display all external memory cards or USB devices currently connected to the frame. 2. Double tap on the external device to display the photos or the photo files. Photo screen Home Network Adding Photos to the Library Notes:... - Page 51 In the Library drop down menu, click Add to Library. Windows Media Player – Library drop down menu In the Add To Library screen, under the Select the folders to monitor section, select My personal folders. Click Add, a pop-up dialog "Add Folder" will appear. Add to Library dialog box...
- Page 52 In the Add Folder dialog box select the folder you want to share and then click OK to add it. Add Folder dialog box When user clicks OK, the Add To Library window will close and the Add to Library by Searching Computer dialog box is displayed. Wait until it finishes and then click Close.
-
Page 53: Checking Shared Photos
Checking Shared Photos In the Window Media Player, set the Category, which is under the symbol at the top left to Pictures. Windows Media Player – Category drop down menu Under Library, select All Pictures, Keywords, Date Taken, Rating, Folder settings. Check whether the added photos exist in the library. -
Page 54: Sharing Settings For Accepting Connections From Your Frame
Sharing Settings for Accepting Connections from Your Frame In the Library tab click on Media Sharing. If your network is a Private network, then the Available Device list and the Settings button will be displayed in the Library Sharing window. Media Sharing dialog box In the Available Device list, select WiFi DPF. -
Page 55: View For Sharing The Photos On Your Frame
In the Library Sharing window, click on the Settings button. The Library Sharing-Default Settings window appears. In the Library Sharing-Default Settings window: for Media Type select Pictures. for Star Ratings select both All ratings and Only. for Parental ratings select All ratings or a required rating under the Default Settings section. -
Page 56: Web
On the Photo screen, tap the Web button. Next, tap the Web icon you want. You can now view photos in it. Supported web album account sites are: Picasa Windows Live Space other sites Photo screen – Web For the other web album accounts, the device may not display perfectly. Photo Setup Slide Show You can show a slide show on the Home Screen or within the Photo... -
Page 57: Setup Web Photo Account
Auto fit, Fit to width and Fit to screen. On the Transition Type line, tap the button. The Transition Type drop down list appears. Select which transition type you want. Available types are: Dissolve, Slide, Blind, Wipe, Random and None On the Photo Interval line, tap the button. - Page 58 Tap on the sharing site you want. Current selections are Picasa, Windows Live Space and Other. Note: If your account is not one of the above listed, then your web photos may not be displayed accurately. To learn how to get the web photo RSS address from internet see Add RSS News Feed.
-
Page 59: Content Service (Windows Live Frameit)
Content Service (Windows Live FrameIt) 1. To open the Photo Player application, on the Home Screen tap the Menu button to open the Main Menu page. 2. Next, tap the Photo/Content Service icon to open the Photo /Content Service screen. 3. - Page 60 On the Account Name line tap to open the Keyboard screen. Type in your account name and then tap OK to save. Tap the Register button. Add the FrameIt account screen After Tap the Register button, server will send a token to the frame. If the Claim Token invalid, tap the Start Over Button can request a fresh claim token.
-
Page 61: Content Service (Framechannel )
After a new account is added, user can see the added account in Add an account screen. Edit the FrameIt Account button in the Account Name line that On the Add an account screen, tap the you want to edit the Account Name. Add an account screen Delete the FrameIt Account On the Add an account screen, tap the... -
Page 62: Account
Account On the Framechannel screen tap the Account button to display all account folder currently registered to the frame. Double tap the Account folder to display the folder about the photo category. Select the category folder you want to display and tap the folder. The frame will display the photo thumbnail. -
Page 63: Copy/ Delete Photos
Note: If the User Name entered contains invalid characters, then a pop up dialog will appear to prompt you re-enter the information. On the Save line, tap Yes to save the account settings or tap No to cancel your settings. You will be returned to the Add an account screen. The new created account will be displayed in Add an account screen, like this: Edit the Framechannel Account button in the account line that you... -
Page 64: Copy All
Copy All In the left side of the Photo screen, tap the location where the photos are that you want to copy. Select any photo. Tap the button, a drop down menu will appear. Tap Copy All to copy the selected photos. A dialog box will appear asking you to “Choose a device for file copy”. -
Page 65: Rss News Reader (Rss2.0)
RSS News Reader (RSS2.0) Notes: To ensure you can view RSS news normally, the feed you added should comply with the standard RSS 2.0 protocol. You can search a feed link on the internet with your PC, and then add it to your RSS News Reader. ATOM and KML format cannot be supported RSS News Feed screen News Feed... -
Page 66: News Feed List Screen
News Feed List screen The RSS News List screen displays the news headlines of one feed. It includes News Type icon, News Headlines, Date and Time of the news. News Type icon > Text icon - the RSS News is text based with photo or without photo. -
Page 67: Rss News Reader
RSS News Reader The RSS News Reader displays the news text content and the media files of news. RSS News Reader Control Buttons / Icons Previous button – review previous news Next button – review next news RSS News Reader News List button –... -
Page 68: Rss News Reader > News Text Content
RSS News Reader > News Text Content 1. In RSS News Reader screen, tap the red circle area to close the News Media Player area and display the News Text Content area full screen. 2. Tap the red circle area again to close the full screen News Text Content area and open the News Media Player area. -
Page 69: Delete One Rss News Headline
Delete One RSS News Headline 1. On the RSS News List screen, tap on the headline that you want to delete. 2. Tap the button to open the drop down menu. 3. Tap on Delete One to remove the selected news headline. Delete All RSS News Headlines 1. -
Page 70: News Setup
News Setup Set General Settings 1. In the RSS News Reader screen, tap the button to open the drop down menu. 2. Tap on Setup. The News > General screen appears. Auto Download Media File You can select to turn on or off the automatic download media files feature when reading the news. -
Page 71: Add / Edit Rss News Feeds (Support Rss2.0 Format Only)
Add / Edit RSS News Feeds (Support RSS2.0 Format only) Get RSS News Feed Address from Internet Note: The Yahoo News website will be used for demonstrating how to add a RSS News Feed. 1. On your PC, connect to http://www.yahoo.com/. 2. -
Page 72: Add A New Rss News Feed
The selected RSS news feed page (or XML page) appears. 8. Copy the RSS address displayed in the Internet Explorer Address box. This is the RSS link you need to enter on the frame. Make sure this is RSS2.0 format. Add a new RSS News Feed On the RSS News >... -
Page 73: Edit A Rss News Feed
The newly created RSS news feed will now be displayed in News > Feeds screen. It will be the last entry on the screen. Edit a RSS News Feed On the RSS News > General screen, tap the button. The News > Feeds screen will appear. -
Page 74: Delete A Rss News Feed
When you are finished entering the information tap the Yes button to save or the No button to exit without saving. Delete a RSS News Feed On the RSS News > General screen, tap the button. The News > Feeds screen will appear. On the news feeds line that you want to delete tap the button. -
Page 75: Media Player
Media Player You can enjoy music and internet radio while using other applications. The Media Player consists of three (3) features: Music – plays audio files Video – plays video files Internet Radio – plays internet radio stations You can play audio and video files that are stored on the frame, from external disks, or your home network. -
Page 76: Music / Video
Music / Video Frame Frame is the internal memory of the device. You can connect to a PC with the provided mini-USB cable to manage your audio and video files. Once you have successfully connected to your PC, you should see a new Removable Disk under My Computer in your PC. -
Page 77: Internet Radio And Web Tv
Internet Radio and Web TV Stations, Podcast or Web TV On the Media Player screen, tap the WebTV / i. Radio tab. The WebTV / i.Radio screen appears. Tap the Stations, Podcast or Web TV button to display a list of all internet categories. -
Page 78: Add To Favorites
Add to Favorites Select a station, procast or Web TV. Tap the button and a drop down menu will appear. Tap the Add to My Favorite button to add the current radio station. This radio station can now be found in My Favorite Stations. Media Setup Setup Media Playback In Media screen, tap the... -
Page 79: Add A Station
Add a Station Note: You can add up to a maximum of 256 stations. In Media Setup, tap the button to open My Added Station screen. On the Add a Station line, tap the button. The My Added Station > Add screen appears. -
Page 80: Edit An Added Internet Radio Station
Edit an added Internet Radio Station To edit an internet radio station, on the My Added Station screen tap the button on the radio station name line. The My Added Station > Add screen appears. On the My Added Station > Add screen, tap the button to open the Keyboard. -
Page 81: Copy / Delete Media Files
Copy / Delete Media Files Copy One In the left side of the Media screen, tap the location where the media file is that you want to copy. Select a media file you want to copy. Tap the button. A drop down menu will appear. -
Page 82: Delete One
Delete One In the left side of the Media screen, tap the location where the media file is that you want to delete. Select a media file you want to delete. Tap the button. A drop down menu will appear. Tap Delete One to delete your selected media file. -
Page 83: Specifications
Specifications Item Specification Panel Type 7’’ TFT display with touch panel Resolution 800X480 Built-in memory 256 MB of internal memory (some is reserved for internal use) Standard WiFi IEEE 802.11b/g, 2.4GHz, 54Mbps Network Network Security Non, WEP, WPA, WPA2 Internet Protocol DHCP / Fixed IP Channels Support 1-14 channels, subject to country regulation... - Page 84 Item Specification Battery model A0427-LF Battery Battery EVE Energy CO., LTD. Manufacturer Name Battery Capacity 2100mAh Battery Voltage 3.7V Language English, French, Spanish, German, Italian, Dutch and Portuguese. Format Photo JPEG, BITMAP, GIF Audio Internet Radio Video WMV, MPEG1(320x240, 25fps) RSS News RSS2.0 standard Photo Slide Show...
-
Page 85: Troubleshooting
Troubleshooting This section lists various problems and solutions encountered by users while using the Wireless Internet Frame. When encountering a problem, first check the list below and follow the suggested action if one matches your problem. If the problem still persists, contact or visit the nearest service center. Symptom Suggested Actions The Wireless Internet Frame does not... - Page 86 Symptom Suggested Actions Make sure your memory card is SD, MMC, MS, xD or CF. Make sure the U disk or memory card has been inserted into the correct slot. It takes some time to load the news Confirm the network strength you connected is strong enough. Close the News application and open again.
- Page 87 Under the influence of electrical fast transient phenomenon, the product may malfunction and require user to power reset. Under the influence of electrostatic phenomenon, the product may malfunction and require user to power reset. Under the environment with Voltage Dips and Interruptions, the communication link of the sample may loss and require user to reset the sample.
Need help?
Do you have a question about the IT7350 and is the answer not in the manual?
Questions and answers