Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Goldtek Technology GT2000
- Page 1 GT2000 User Guide Version 1.00 Revision A August 2009...
- Page 2 The GT2000 has Bluetooth and wireless LAN rights reserved. approval in most EU countries, and the This is the August 2009 release (Revision A) of GT2000 is also compliant with GSM and UMTS the GT2000 User Guide. conformity assessment requirements specified by the Radio and...
-
Page 3: Ac Power Adaptor Safety
Do not drop or puncture the GT2000. Do not open the GT2000 or short-circuit its contacts. Avoid contact with the GT2000 if it appears to be leaking. Battery fluid is corrosive, and contact with it can result in personal injury and/or property damage. To prevent injury or damage. -
Page 4: Safety Information
After washing the GT2000, take care the completely drain it and use a dry cloth to wipe off any drops of water adhering to it. Leave the GT2000 to dry completely in a well-ventilated place away from direct sunlight. - Page 5 IMPORTANT NOTICES FOR USA 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device was tested with the belt-chips (Brand name: Fourier Model: 001-A-B-GPS-03-YYMMDD, the thickness: 21mm) directly to the human body.
-
Page 6: Table Of Contents
Using Wi Fi to connect PDA with GT2000 and access to the Internet....17 First user (owner) to establish internet connection from PDA......17 Using Wi Fi to connect notebook with GT2000 and access to the Internet ..19 First user (owner) to establish internet connection from notebook ....19 Set APN ...................... -
Page 7: What's In The Box
What’s in the BOX? When you unpack the GT2000, check that you received all the components, as shown below. Quick Start Guide USB Data Cable GT2000 AC power adaptor and Getting Started Disc international adaptor kits Figure 1.1 Items included with the GT2000 Inspect all contents for visible damage (scratches, dents) and if any components appear damaged, notify the shipping carrier. -
Page 8: Getting Started
Getting Started Parts of the GT2000 The following pages show the main parts of GT2000. Battery status LED 2G / 3G LED Wi-Fi / Bluetooth LED Power / Switch button Figure 2.1 GT2000 – front view Reset button Power switch Figure 2.2 GT2000 –... -
Page 9: How To Operate Gt2000
How to operate GT2000 1. Screw off the “USB cover” by a coin or screwdriver and then remove the “USB cover” USB cover Screw off the “USB cover” by a coin 2. Insert SIM card into the “SIM card slot” (please make sure the SIM card doesn’t require PIN code) and screw the “USB cover”... - Page 10 3. Screw off the “Power switch cover” by screwdriver, and switch the Power Switch to “ON” and then screw the “Power switch cover” tightly back to the device. Power switch cover Reset button Power switch 9 GT2000 User Guide...
-
Page 11: Button And Indication
Wi-Fi / Bluetooth LED 1. Power / Switch button Press and hold Power / Switch button to turn on the GT2000 (Power switch need to set to “ON” and SIM card is inserted) Press and hold “Power / Switch button” until “Wi-Fi / Bluetooth LED” and “2G/3G LED”... -
Page 12: Using Gt2000 At The Very Beginning
GT2000 battery cannot be charged is the temperature is lower than 0 C(-32 F) or higher than 45 C(113 F) When GT2000 has not been used for a long time, please fully charge for 4 hours first before start using it again. -
Page 13: What Is Gt2000
GT2000 is a portable wireless modem. Any device such as PDA (Personal Digital Assistant) or notebook which does not have 3.5G internet access ability but has Wi-Fi or Bluetooth function can connect with GT2000 via Wi-Fi or Bluetooth and then access to the Internet by GT2000. -
Page 14: Setting The Devices
2. Click “PWM_PPC” to install 3. After install completed, please restart the PDA Note: if there is new PWM_PPC.cab released, please update “PWM_PPC.cab” in PDA Repeat step 1 and 2, click “OK” to complete the update process 13 GT2000 User Guide... -
Page 15: Save Pwm_Pc.exe And Pwm_Dlg.dll Into Your Notebook
“PWM_PC.exe” and “PWM_DLG.dll” can only be executed in the Windows Vista or Windows XP notebook Whenever want to connect to GT2000 via Wi-Fi, please execute the “PWM_PC.exe” Pair Bluetooth between PDA and GT2000 1. Turn on GT2000 and make sure Bluetooth is “ON”... - Page 16 4. Click “PWM_PPC” 5. Select “Main” set “Select connection type” to “Bluetooth” 6. Select “Main” and the “Apply” turn to gray click “Apply” 15 GT2000 User Guide...
- Page 17 7. Click “Establish” button and then start to connect to Internet 8. After connection established, surf the web via Internet Explorer 9. Click “Release” to disconnect with Internet GT2000 User Guide 16...
-
Page 18: Using Wi Fi To Connect Pda With Gt2000 And Access To The Internet
Using Wi-Fi to connect PDA with GT2000 and access to the Internet 1. Turn on GT2000 and make sure Wi-Fi is “ON” 2. Turn on PDA Wi-Fi function. 3. PDA will search for the available Wi-Fi networks and please select and connect with “GT2000Adhoc”... - Page 19 “Select connection type” to “Wi-Fi” and Wait for DHCP-assigned IP address 4. Click “Apply” and screen will stay for several seconds to check Internet connection status 5. Click “Establish” button and then start to connect to Internet GT2000 User Guide 18...
-
Page 20: Using Wi Fi To Connect Notebook With Gt2000 And Access To The Internet
After first user (owner) established internet connection, second user can access Internet via GT2000 when connect with GT2000. Using Wi-Fi to connect notebook with GT2000 and access to the Internet 1. Turn on GT2000 and make sure Wi-Fi is “ON”... -
Page 21: Set Apn
2. GSM (2G Only): Force to use GSM only. 3. UMTS (3G Only): Force to use UMTS only. After changing the setting, the PDA will disconnect from GT2000 first “2G/3G LED lighting” (if change the setting to GSM network, amber LED ON, and if change to... -
Page 22: Set Dialing
1. SSID default is “GT2000Adhoc” 2. If want to change “channel”, please modify SSID first 3. If ever change the setting in “GT2000_WI-FI”, the PDA will disconnect from GT2000. User will also need to execute Wi-Fi Advance Setting. 4. Network Key format 5 or 13 digits (any ASCII character) 10 or 26 digits hexadecimal (0.1.2.3.4.5.6.7.8.9.A.B.C.D.E.F). -
Page 23: Wi Fi Advance Setting
Wi-Fi Advance setting 1. Go to “Start” “Settings” 2. Select “Connections” click “Wi-Fi” icon 3. Select “Only Computer - to - Computer” or “All Available” GT2000 User Guide 22... - Page 24 4. Searching and click “GT2000Adhoc” 5. Click “Next” 6. Click “Next” Set “Authentication” to “Open”, “Data Encryption” setting need to be same as “GT2000_Wi-Fi” 23 GT2000 User Guide...
-
Page 25: Update "Gt2000 Os
“ Next” click “Finish” Update “GT2000 OS” If there is any new release for GT2000 OS, please save the new OS to computer and update the OS in GT2000. 1. Please “Power OFF” the GT2000 2. Connect GT2000 with computer via “USB Data Cable”... -
Page 26: Others
All settings will remain the same. 3. Switch between Wi-Fi and Bluetooth Whenever want to change the connection way with GT2000, please disconnect PDA with GT2000 first press “Power/Switch button” to switch Wi-Fi (Bluetooth) to Bluetooth (Wi-Fi) on GT2000 execute “PWM_PPC”... -
Page 27: Trouble Shooting
- press “Reset button” to reset the GT2000 (please refer to page 25) - User set GT2000 band to UMTS but insert a 2G only SIM card, please change to 3G SIM card or clean boot GT2000 and make the band setting back to “Auto-Select”...
Need help?
Do you have a question about the GT2000 and is the answer not in the manual?
Questions and answers