1. Manuals
  2. Brands
  3. Rebis Audio Manuals
  4. Computer Hardware
  5. RA702
  6. Operator's manual

Rebis Audio RA702 Operator's Manual

Multi gate
Hide thumbs
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
REBIS AUDIO RA702
MULTI GATE
OPERATORS MANUAL
CONTENTS
Page
2
3
4
5
5
5
6
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RA702 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rebis Audio RA702

  • Page 1 REBIS AUDIO RA702 MULTI GATE OPERATORS MANUAL CONTENTS Page Installation Audio Operation Sync General Use Drum Separation LED Indicators Specification Controls...

  • Page 2: Installation

    CHASSIS OF THE RA702 IS ULTIMATELY CONNECTED TO MAINS EARTH. Audio Connections Audio connections to the RA702 are made via 0.25 inch 'A' type mono jacks. To avoid earth loops it is normal practice in professional studios to run a single 0V connection to the patchbay, and make signal screens discon- tinuous.

  • Page 3: Audio Operation

    Fast range should be selected for percussive sounds. Fine tuning of the Attack is done auto- matically by the RA702 to match the dynamic profile of the material. This semi automatic approach ensures optimum attack with the mini- mum of adjustment.

  • Page 4: Sync

    This leads to ragged 'tails' on otherwise perfect performances. The Rebis MultiGate solves this problem with its unique Sync feature. In Sync mode the RA702 automatically selects the track with the short- est phrasing, and uses it as a key to close all the gates simultaneously.

  • Page 5: General Use

    GENERAL USE The RA702 MIDI Gate is normally used in the channel inserts of a mix- ing desk. If pre and post inserts are available the post eq inserts should be used, and if other signal processors are being used in series with the gate then it should be the last element in the chain.

  • Page 6: Specification

    SPECIFICATION Model: RA702 MultiGate Channels: 4 Inputs: Maxlevel+21dBm.Impedance 100 kilohms Outputs: Max level +21dBm into 600 ohms. Impedance less than 50 ohms Balancing: Optional electronic Distortion: Less than 0.05% 20Hz to 20kHz Noise: -104dBm. 20Hz to 20kHz. Gate closed -95dBm. 20Hz to 20kHz. Gate open Frequency Response: +0.5dB.

  • Page 7: Controls

    CONTROLS IN: Individual gate in/out Threshold: +20dBm to -40dBm Threshold LED: Signal above threshold Attack: Programme related, semi-automatic Fast range 50uSto 100uS Slow range 500uS to 2mS Release: 40mS to 2 Seconds (combined holdand decay) Release LED: Fades to indicate release time. Ext/Key: Selects external side chain source.

Table of Contents