Advertisement
Available languages
Available languages
EN
5.1 Put the headset in pairing mode
a First time pairing
Turn on the headset and the Jabra CLIPPER will automatically enter
pairing mode (indicator light is solid blue) and start searching for a
device.
b Later pairing
Starting with the unit turned off, press and hold the Multi-Function
button until the indicator light is solid blue (approximately 6 seconds).
5.2 Set your Bluetooth® phone or device to search for the Jabra CLIPPER
Follow your phone's instruction guide. First make sure that Bluetooth® is
activated on your mobile phone. Then set your phone to search for the
headset. This usually involves going to a 'setup, ' ' connect' or Bluetooth®
menu on your phone and selecting the option to search for or 'add' a
Bluetooth® device.*
5.3 Your phone will find the Jabra CLIPPER
The phone will find the headset under name "Jabra CLIPPER".
Your phone then asks if you want to pair with the headset.
Accept by pressing 'Yes' or 'OK' on the phone and confirm with the
passkey or PIN = 0000 (4 zeros) if required.
Your phone will confirm when pairing is complete.
* Phone dependent
Advertisement
