Index Before Using Technique Parameter…………………………………………………………………… 3 Packing List…………………………………………………………………………… 3 Layout…………………………………………………………………………………… 3 How it Works …………………………………………………………………………… 4 Function Setup Scan Mode…………………………………………………………………………… Menu View Mode…………………………………………………………………………… Rec Store…………………………………………………………………………… Rec Files……………………………………………………………………… 6 Store Format……………………………………………………………………… 6 Systems…………………………………………………………………………… 7 Motion Record……………………………………………………………………7 Clock Setting……………………………………………………………………7 Pairing Camera...
Before Using Technique Parameter Layout 1.IR; 2.Power; 3.CH; 4.AN- 5.M; 6.AN+ ;7.Earphone*; 8.DC 5V; 9.Pairing Key; 10.DC 5V; 11.SD card socket Packing List The package contents: One Wireless DVR&Moniter; Four Wireless Cameras; Five DC 5V Adapters; One Remote Control.
How it Works 1.Connect the adapter to Moniter/Camera,then connect the adapter to the AC socket; 2.Press Power Key on Moniter for more than 2 seconds to open it; 3.The image will come out when Moniter is paired with Camera,the step is shown below Chooes Cam X and press M ,a few red arrows will appear,then press Pairing Key on...
Function Setup Scan Mode In this mode,user can view the realtime image。 Keys function are shown below : CH:Camera switch AN-:volume lower AN+:volume higher M:Menu Means motion detection is on Menu AN+,AN-:up,down,CH:exit,M:enter View Mode When View Mode icon is highlight,press M to enter。 Split 4 Scan Mode displays 4 picture in picture Auto...
Function Setup In Rec Store,rec files is store by time。 When playback,CH is for pause,AN+,AN- is playing the previous/the later file。 Store Format SD Card Overwrite is always on,when SD card is been full,the earliest file in one hour is deleted。 Chooes OK,SD card will be formatted.
Function Setup Clock Setting M for choosing,AN-,AN+ for modifying。 choose Clock Setting and press M Pairing Camera Find it in page 3 How it works.
Page 8
FCC ID: M7U-D702MC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the D702MC and is the answer not in the manual?
Questions and answers