Advertisement
● If the chopper labours, remove some of the mixture and continue processing in several
batches, otherwise you may strain the motor.
● Remember that chopping hard foods such as coffee beans, spices, chocolate or ice will
wear the knife blades faster.
● Beware of over processing some ingredients. Stop and check the consistency
frequently.
● To ensure even processing and better result, always scraping rotator to move food
scraper, scrape food down from bowl side.
● The best results are obtained by chopping small quantities at one time.
● Cut larger pieces of food into 1-2cm pieces. A large load or large pieces may cause
uneven results
● Before chopping nuts, herbs, breadcrumbs etc, ensure that both the food and the blade,
bowl and cover are thoroughly dry.
Care and cleaning
Caution danger of injury! The blades are very sharp! Do not touch the blades while
cleaning to avoid injury! For safety reason, the blades are not suited for removing
them.
Caution! Danger of electrical shock! Before cleaning and removing parts, switch off
the electric appliance and always remove the plug from the mains. Never immerse
the appliance into water. The connector parts must not get wet. Contact of electrical
parts with moisture can cause electric shock or short circuit and damage.
Do not use sharp detergents or metallic, abrasive objects to clean the unit as the
surface of the unit or accessories might get damaged.
If necessary just wipe the motor unit with a dry or damp cloth. The these parts in
water with soap or put them in dishwasher for washing.
Store the unit in a dry safe place, not reachable for children.
How to assemble the silicon ring
Press
Advertisement
