Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Uni-Art HP5090A
Summary of Contents for Uni-Art HP5090A
- Page 1 HP5090A 900MHz WIRELESS HEADPHONE SYSTEM User Manual...
- Page 2 INTRODUCTION This 900MHz compact stereo headphones takes advantage of the very latest advances in wireless transmission technology so that you can listen to music or the sound freely around your house. All you have to do is connect the transmitter to any audio source: DVD player : CD player, MP3 player, iPod, TV set, Hi-Fi system or Radio.
-
Page 3: Component Identification
COMPONENT IDENTIFICATION... - Page 4 COMPONENT IDENTIFICATION Wireless Headphone Receiver Signal Indicator LED (Green) Auto Tune Button Volume Control Ear Cushion Holder Power Indicator LED (Red) Power On/Off Switch Charge Contact Wireless Transmitter 10. Charge/Transmit Indicator LED (Green) 11. Power Indicator LED (Red) 12. Charge Pins 13.
-
Page 5: Installation
INSTALLATION TRANSMITTER Connect the Power Adapter to the DC IN input Socket located on the transmitter rear panel. Connect the Power Adapter provided to an Electrical Outlet. An Audio Connection Cable with 3.5 mm Jack Plug is provided, to connect the Transmitter to the Audio Devices (e.g. -
Page 6: Operation
OPERATION Switch on the Audio Source (TV set or audio component) that the Transmitter is connected to. Select the On/Off Switch in the Headphone Receiver to ON position. Adjust the Volume for desired sound level. If a good reception is not obtained, press the "Auto Tune" button on the Headphone Receiver. -
Page 7: Charging The Batteries
CHARGING THE BATTERIES 1. Select the On/Off Switch in the Headphone Receiver to OFF position. 2. Place the Headphone Receiver on the Transmitter, make sure the Charge Contact touches the Charge Pins on the Transmitter. 3. The Charging process starts automatically with the Charge/Transmit Indicator LED glows in Green constantly;... -
Page 8: Technical Specifications
TECHNICAL SPECIFICATIONS Transmission mode : UHF stereo Carrier frequency : Ch 1 : 912.98 – 912.02 MHz Ch 2 : 912.48 – 912.52 MHz Ch 3 : 912.98 – 913.02 MHz Operating voltage : Transmitter – 8V 200mA Receiver – 2.4V (two rechargeable batteries, LR03/AAA size) Frequency response : 40 Hz –... -
Page 9: Troubleshooting
TROUBLESHOOTING NO SOUND Ensure that the mains adapter is pushed fully into the power outlet and that its cable is properly connected to the DC IN connector on the transmitter. Ensure that the receiver headphones On/Off switch is switched to the The headphones battery charge level may be too low.
Need help?
Do you have a question about the HP5090A and is the answer not in the manual?
Questions and answers