Graco ultra clear vibe Owner's Manual page 9

Using AC Adapters
1
• To use AC adapters, plug the connector on the
cord into the AC adapter jack on the side of the
Parent Unit, then plug adapter into a standard
wall outlet.
2
• To use AC adapters, plug the connector on
the cord into the AC adapter jack on side of the
Nursery Unit, then plug adapter into a standard
wall outlet.
• Use ONLY the Graco adapters included with
the unit. Do not use these adapters with other
equipment under any circumstances.
• If units do not work, check that AC adapters
are plugged into working outlets.
• The Nursery Unit uses a standard 120 volt AC
household current.
• The Parent Unit will operate on
3-AA (LR06-1.5V) batteries.
If the LED does not light at all, then replace the
batteries.
9