Viper Maxx Quick Start Setup Manual

QUICK START SETUP GUIDE
1. Open the crate and unscrew the braces with a
Phillips screwdriver.
2. Enclosed is a Viper Accessory Box.
3. Remove the Viper MAXX from the crate and place on a level
table. (Please have 2 people li machine)
4. Plug your power cord into the machine and turn on.
5. Ensure the red E-Stop bu on is not pressed by twis ng 1/4
turn to the ght to release.
6.Insert the Fluid Supply Tube to the Fluid Input on the
side of the machine and place into the fluid jug you want to use. (Please shake your
pretreatment jug before using each day for any pretreatment you use)
7. If the spray head is not to the rear of the machine press the Start Bu on once to send to home.
8. Place the Spray p jar/Purge Container in the spot under the spray valve.
9. Press the Purge Bu on on the side of the machine for 10 seconds to fill the machine.
10. See videos online at Viperxpt.com for the how to spray guide, and any trouble shoo ng ps.
www.viperxpt.com
WHAT'S INCLUDED
• Viper MAXX Pretreatment Machine.
[Inside Accessory box below]
• Power Cord
• One (1x) Fluid Supply Tube
• Tip Soaking Jar/Purge Container, and
Toothbrush
• Tip gauge
• 1 Quart Image Armor ULTRA Pretreatment
• 1 Quart Image Armor DARK Pretreatment
• 1 Quart Image Armor LIGHT Pretreatment
• 1 Quart Image Armor CLEANING SOLUTION
Scan the QR Code below
to access our online manual and videos
SEE REVERSE SIDE
FOR MORE INFO
Rev. 1.2