Page 2
• Demo mode. 2.0 Description The A753 has one 4-20mA input and two discrete inputs. Other analog inputs are available always refer the label on the side of the unit to determine proper input. Dis- crete inputs can be either wet or dry. The status of the discrete inputs is displayed on the front panel as A1 and A2.
Page 3
4-20mA signal (or analog positive see A2B wet contact positive 5 - 32 VDC label on side of unit) Table 1 Transmitter connections. Analynk Wireless, LLC ! 790 Cross Pointe Road ! Columbus, OH 43230 Phone: (614) 755-5091 Fax: (614) 755-5093 Web: www.analynk.com...
Figure 3 shows the function of each switch position. Return all switches to Mode 0 for normal operation. Refer to figure 3 for mode switch settings. Analynk Wireless, LLC ! 790 Cross Pointe Road ! Columbus, OH 43230 Phone: (614) 755-5091 Fax: (614) 755-5093 Web: www.analynk.com...
Page 5
Return all switches to b000 when demo is complete. Figure 4 RF Channel Selection. Analynk Wireless, LLC ! 790 Cross Pointe Road ! Columbus, OH 43230 Phone: (614) 755-5091 Fax: (614) 755-5093 Web: www.analynk.com...
Page 6
(e.g. 4,8,12,16,and 20ma). 4.3.14 If unit is properly calibrated – disconnect calibration source; otherwise, repeat calibration process – starting at step 4.3.2. Analynk Wireless, LLC ! 790 Cross Pointe Road ! Columbus, OH 43230 Phone: (614) 755-5091 Fax: (614) 755-5093 Web: www.analynk.com...
Page 7
11 to 32 Vdc, 5W maximum Operating Temperature Range: C to +85 RF Encryption: 256 bit DIN RAIL MOUNT: 35mm Analynk Wireless, LLC ! 790 Cross Pointe Road ! Columbus, OH 43230 Phone: (614) 755-5091 Fax: (614) 755-5093 Web: www.analynk.com...
Need help?
Do you have a question about the A753 and is the answer not in the manual?
Questions and answers