Do you have a question about the SWT225 and is the answer not in the manual?
Questions and answers
Summary of Contents for SK Telesys SWT225
Page 1
THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SK TELESYS CO., LTD. THE INFORMATION MAY NOT BE USED, DISCLOSED OR REPRODUCED WITHOUT THE PRIOR WRITTEN AUTHORIZATION OF SK TELESYS AND THOSE SO AUTHORIZED MAY ONLY USE THE INFORMATION FOR THE PURPOSE OF EVALUATION CONSISTENT WITH AUTHORIZATION. REPRODUCTION OF ANY...
3.1.2 View access to wireless network ......................11 3.2 Access via LAN (wired) ....................13 3.2.1 Connection between SWT225 and PC ....................13 3.2.2 View access to wired network ......................14 SECTION 4. TROUBLE SHOOTING ............... 15 4.1 Checking via LEDs ......................15 4.2 Checking through WEB CM ...................
Page 3
CPE (SWT225) Patent‐pending technologies to improve data performance [ List of Figures ] FIGURE 1. COMPONENTS OF SWT225 ..................4 FIGURE 2. FRONT LEDS ......................5 FIGURE 3. REAR PORTS ......................6 FIGURE 4. ANTENNA CONNECTION ..................7 FIGURE 5. ADAPTER CONNECTION ..................8 FIGURE 6. FASTENING OF SCREWS ..................8 FIGURE 7.
Patent‐pending technologies to improve data performance Section 1. SWT225 Components SWT225 CPE provides the WiFi service to users using the WiMAX service in the region where the WiMAX service is available. In this manual, [terminal] stands for all devices which can use wireless LAN (WiFi), such as laptops, smart phones, and other devices.
CPE (SWT225) Patent‐pending technologies to improve data performance 1.2 Front View Figure 2. Front LEDs Items Descriptions Indicates power supply to the device. Flashes green Power when normal. Indicates the state of wireless LAN (WiFi). Flashes WiFi green when normal. Blinks while data is transferred. LAN1 Indicates the state of LAN Port 1.
CPE (SWT225) Patent‐pending technologies to improve data performance 1.3 Rear View 3. Reset button 4. Power Port 1. LAN Port #1 2. LAN Port #2 Figure 3. Rear Ports Items Descriptions Provides wired connection to a terminal. A terminal LAN1 connected into this port will be allocated an IP address automatically (via DHCP).
Figure 4. Antenna connection 2.2 Adapter connection Connect the adapter to the main body as show in Figure 5. SWT225 has no power switch. Therefore power is supplied to the device upon connection of the adapter. SK Telesys Co., Ltd. | 7...
CPE (SWT225) Patent‐pending technologies to improve data performance Figure 5. Adapter connection 2.3 Station connection Fasten the two screws to the bottom of the main body of SWT225 as shown in Figure 6 to mount the stand. Figure 6. Fastening of screws SK Telesys Co., Ltd. | 8...
CPE (SWT225) Patent‐pending technologies to improve data performance Figure 7. A view of the bottom after the screws are fastened Mount the stand onto the device using the screws as shown in Figure 8. Figure 8. Mounting of the stand SK Telesys Co., Ltd. | 9 Confidential & Proprietary...
Detection of wireless network and access Run wireless network detection on your computer and see what networks exist around it. If SWT225 is included in the list of networks, double click on the SSID to access WiFi. Figure 9. Wireless network detection ...
CPE (SWT225) Patent‐pending technologies to improve data performance 3.1.2 View access to wireless network Once access via WiFi is made, information is displayed as shown in Figure 10. Figure 10. View access to wireless network SK Telesys Co., Ltd. | 11 Confidential & Proprietary...
3.2 Access via LAN (wired) 3.2.1 Connection between SWT225 and PC Connect between the LAN port of SWT225 and the Ethernet port of your PC using the LAN cable provided with the device. Figure 12. Connection to the LAN port ...
WEB CM access via WiFi or LAN, however, is available even when the WiMAX modem is not connected to the base station. 4.1 Checking via LEDs You can verify that you have an Internet access based on the indication of the LEDs on SWT225. Color(s) Function Power...
(WiFi), bring up the web browser on the terminal and type http://192.168.2.1 to access the WEB CM of SWT225. Access via the LAN port: If your terminal is connected to SWT225 via the LAN port (wired), bring up the web browser on the terminal and type http://192.168.2.1 to access the WEB CM of SWT225.
CPE (SWT225) Patent‐pending technologies to improve data performance Figure 15. Checking of WiMAX connection at WEB CM SK Telesys Co., Ltd. | 17 Confidential & Proprietary...
Page 19
FCC RF Radiation Exposure Statement The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operation in conjunction with any other antenna or transmitter.
Need help?
Do you have a question about the SWT225 and is the answer not in the manual?
Questions and answers