Download Print this page

Pribusin IUC-7X-WTX Instruction Manual

Download this manual

Instruction Manual

Model:

Function:

Input:

Calibration:

Output:

Power:

Serial #:

For Technical Assistance And Questions Call

USA: (734) 677-0459 CANADA: (905) 660-5336

IUC-7X-WTY

Isolated Watts Transducer

Y=1: Single Element

Y=2: Dual Element

Full Scale Watts:

P .T.:

X=1: 1-5 mA

X=2: 4-20 mA

X=3: 0-1 mA

X=7:

117 VAC, 60 Hz, 6 VA

240 VAC, 60 Hz, 6 VA

24 VDC, 160 mA

(If special or required)

Manufacturers of Process

Controls and Instrumentation

C.T.:

X=4: 10-50 mA

X=5: 1-5 VDC

X=6: 0-10 VDC

Page 1 Manufacturers of Process Controls and Instrumentation Instruction Manual Model: IUC-7X-WTY Function: Isolated Watts Transducer Input: Y=1: Single Element Y=2: Dual Element Calibration: Full Scale Watts: P .T.: C.T.: Output: X=1: 1-5 mA X=4: 10-50 mA X=2: 4-20 mA X=5: 1-5 VDC X=3: 0-1 mA X=6: 0-10 VDC X=7:...
Page 2: Restocking Policy
Restocking Policy All product returned to Pribusin Inc. in prime condition (not damaged, scratched or defaced in any way) within seven (7) months from the original date of shipment is subject to a 50% restocking charge. All product must be accompanied by a Return Authorization number (RA number) which must be obtained from Pribusin Inc.
Page 3: Specifications
CSA and NRTL Approved (LR 51078) NRTL/C Calibration: Function: The IUC-7X-WTX is a new & improved model of its prior No calibration is required on these watts transducers. version. It uses a microprocessor to compute There is a zero and span adjustment for the output instantaneous voltage and current values which it then signal for output calibration.
Page 4 IUC-7X-WTX Connection: Shown here for 4-20mA Input and Output Single Element, 1 Phase (A,B) Double Element, 3 Phase Single Element 3 Phase (A,B,C) Model Designation: Enclosures & Dimensions: IUC- 7X-WTX Input Output 1: 1-5 mA (4000 Ohm Drive) 1: Single Element (500W)