Safety Tips - Buffalo L310 Instruction Manual

UK

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT immerse the appliance in water, or use jet/pressure
washers to clean it.
• DO NOT touch hot surfaces with bare hands. Always use the
handles/protective gloves.
• DO NOT overfill the appliance. Keep the water level below the
'MAX' level.
• DO NOT allow the water level to drop below the 'MIN' level
during operation.
• DO NOT move the appliance when it contains hot liquid.
• DO NOT use the appliance for anything other than its intended
use.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• Not suitable for outdoor use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by a
BUFFALO agent or a recommended qualified technician in
order to avoid a hazard.
2
L310_L371_S007_S047_S077_ML_A5_v8_20181116.indb 2 2018/11/16 13:20