Hubbell PSCLBT27 Operation Manual

Portable load break tool

Advertisement

Quick Links

Portable Load Break Tool
Operation Manual
PSCLBT27
Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com to confirm current design specifications.
©2015 Hubbell Incorporated | hpsliterature@hubbell.com | hubbellpowersystems.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSCLBT27 and is the answer not in the manual?

Questions and answers

Summary of Contents for Hubbell PSCLBT27

  • Page 1 Portable Load Break Tool Operation Manual PSCLBT27 Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com to confirm current design specifications. ©2015 Hubbell Incorporated | hpsliterature@hubbell.com | hubbellpowersystems.com...
  • Page 2: Table Of Contents

    Table of Contents Introduction Warnings Ratings Application Features Warranty Safety Procedures Tool Operation Operational Life ©2015 Hubbell Incorporated | Chance Load Break Tool ®...
  • Page 3: Introduction

    If further information is desired or if particular problems are encountered which are not sufficiently covered in this guide, contact Hubbell Power Systems, Inc. CAUTION The Chance ®...
  • Page 4: Ratings

    Tools must not be used for switching parallel (“back-to-back”) capacitor banks. Tools must not be used for switching ungrounded-wye connected banks or grounded- wye connected banks on ungrounded systems where maximum system operating voltage exceeds 18 kV for Catalog Number PSCLBT27 ©2015 Hubbell Incorporated | Chance Load Break Tool...
  • Page 5: Application

    Chance® Load Break Tool familiarize yourself with all operational features prior to use. It is also recommended that the user practice using the tool on de-energized equipment to gain familiarity with proper operation and handling of the tool. ©2015 Hubbell Incorporated | Chance Load Break Tool ®...
  • Page 6: Tool Operation

    (see Figure 1). It is necessary for the user to connect the Chance® Load Break Tool on the opposite side of the cutout or switch from their position below (See Figure 2). Figure 1 - Incorrect Approach Figure 2 - Correct Approach ©2015 Hubbell Incorporated | Chance Load Break Tool ®...
  • Page 7 We recommend that each utility or contractor establish a 6 to 12 month inspection and maintenance schedule. This will help to support the best operational life of the equipment. ©2015 Hubbell Incorporated | Chance Load Break Tool ®...
  • Page 8 Hubbell Power Systems, Inc. 210 N. Allen Street Centralia, MO 65240 (573) 682-5221 www.hubbellpowersystems.com Hubbell has a policy of continuous product improvement. Please visit hubbellpowersystems.com to confirm current design specifications. TD_09_070_E ©2015 Hubbell Incorporated | Chance Load Break Tool ®...

Table of Contents