Advertisement
Quick Links
Cylinder Maintenance & Repair Instructions
Model MH & Model LM Pneumatic Cylinders
®
P E N I N S U L A R
Proximity Switch & Non – Proximity Switch Designs
C Y L I N D E R C
O.
Model MH Air Cylinder -
NFPA, Heavy-Duty Steel, Prelubricated for Life
-
Model LM Air Cylinder
NFPA, Medium-Duty Aluminum, Prelubricated for Life
27650 Groesbeck Highway * Roseville, Michigan 48066-2759
(586) 775-7211 * (800) 526-7968 * Fax: (586) 775-4545
www.Peninsularcylinders.com Email: Sales@Peninsularcylinders.com
REL 4/20/04 REV 8/01/07
Advertisement
Summary of Contents for Peninsular Cylinder MH Series
- Page 1 Cylinder Maintenance & Repair Instructions Model MH & Model LM Pneumatic Cylinders ® P E N I N S U L A R Proximity Switch & Non – Proximity Switch Designs C Y L I N D E R C Model MH Air Cylinder - NFPA, Heavy-Duty Steel, Prelubricated for Life Model LM Air Cylinder...
- Page 2 Cylinder Maintenance and Repair Instructions Model MH & Model LM Pneumatic Cylinders Please refer to the Cylinder Parts List drawing and related charts when performing maintenance on a cylinder. ROD CARTRIDGE SEALS To replace the Rod Cartridge Seals: 1. Remove the Rod Cartridge Retainer Screws (items 12). Normally, the Tie Rod Nuts (items 21) DO NOT have to be loosened to replace the Rod Seal (item 3) and the Rod Wiper Seal (item 2) unless the cylinder is supplied with a "Tie Rod Retained Cartridge".
- Page 3 PISTON SEALS To replace the Piston Seals: 1. Remove the Tie Rod Nuts (items 21), the Tie Rods (items 18) and the Front and Rear End Caps (items 14 & 20). See instructions 1 & 2 under "Tube End Seals". 2.
- Page 4 Model MH & Model LM Pneumatic Cylinder Parts List (1) Rod Bearing Cartridge (4) Rod Cartridge Retainer Screws (1) Rod Wiper Seal (1) Rod Cartridge Retainer (1) Rod Seal (1) Front End Cap (1) Rod Cartridge O-Ring Seal (1) Cylinder Tube (2) Cushion Screw O-Ring Seals (1) Cushion Hub - Front End Cap (2) Cushion Adjustment Screws...