Advertisement
Advertisement
Summary of Contents for JPRiDE JPT2
- Page 1 User manual JPRiDE-JPT2 ...
-
Page 2: Table Of Contents
Contents 1.Productoverview--------------------------------------------------------------1 2.Essentialoperationandfunction-----------------------------------------------2 3.TXtransmitterusage----------------------------------------------------------3 4.RXreceiverusage--------------------------------------------------------------6 5.Charging------------------------------------------------------------------------9 6.IndicatorLEDlight-------------------------------------------------------------10 7.Productdescription----------------------－---------------------------------11 8.NotesandFAQ--------------------------------------------------------------12 ... -
Page 3: ProductOverview
roduct overview Packinglist： A. JPT2bluetoothadapter1 B. 3.5mmaudiocable1 C. MicroUSBchargingcable1 D. Manual1 E．SPDIFcable1... -
Page 4: EssentialOperationAndFunction
In power off status, press MFB around 2 seconds, blue LED flashes twice, JPT2 is powered on. If JPT2 didn’t Power on connect with any device before, it will enter into pairing (TX/RX) mode automatically after power on, with Blue and Red... -
Page 5: TxTransmitterUsage
A．Power off status pull TX/RX button to TX side，long press MFB 2 seconds to power on，after blue LED flashes twice, JPT2 power on, when paring list is clear ( JPT2 didn’t connected with any devices before), power on then enter into pairing mode automatically, Blue and Red LED flashes alternately B．... - Page 6 Notes： *If JPT2 can’t connect two devices, please power off then power on again * When JPT2 is working as Bluetooth transmitter try to connect with two device simultaneously, perhaps can’t compatible with all bluetooth devices in the market，some devices has no sound, discontinuous playing or can’t connect...
- Page 7 3.3 In TX status connect with TV Connect JPT2 with your TV by 3.5mm audio cable or optical fiber, then It can hear the sound coming from TV in the device which connect with JPT2 Notes： *If use fiber optic cable, please insert it into SPDIF TX port of JPT2 *If no sound in the Bluetooth device，please use a wired headset insert to the Φ3.5mm...
- Page 8 A． In power off status pull TX/RX button to RX side，then long press MFB 2 seconds, after blue LED flashes twice, JPT2 power on, when paring list is clear ( JPT2 didn’t connect any devices before), power on and automatically enter into pairing mode B ．Power on the unit in standby status, short press“Paring button”（last for 0.2 second）...
- Page 9 B． Make the second device（computer, tablet or cellphone) power on and turn on bluetooth function C． Put JPT2 together with the second device, click the second device’s bluetooth search, click connect when JPT2 appeared. After paired successfully, blue LED blink once then...
- Page 10 4.3 In RX status connect with speaker Connect JPT2 with your home speaker by Φ3.5mm audio cable or optical fiber, then play music in the cellphone (tablet, computer ) which has already connected with JPT2 by bluetooth, you can listen to music from the speaker Notes：...
-
Page 11: Charging
2 hours. When the red LED disappeared, that means the battery is charged fully Charging operation Please insert the Micro head into the JPT2 charging port by Micro USB cable, USB head insert into the USB charger ( car charger, travel charger, computer’s USB etc.) Notes：... - Page 12 6. Status indicator LED Status Indicator LED Poweron(TX/RX) BlueLEDflashestwice Poweroff(TX/RX) RedLedflashestwice Paringstatus(TX/RX) BlueandRedLEDflashesalternately Connectedstatus(TX) BlueLEDblinkoncethendisappeared Connectedstandbystatus(RX) BlueLEDlonglit Connectedworking AllLeddisappeared status(TX/RX) 1to2workingstatus(TX/RX) AllLeddisappeared GreenLEDblinkoncethendisappeared,blue 1to2standbystatus(RX) LEDlonglit RedLEDflashes(chargingorpoweroff lowbatterystatus immediatelycanoutofthisstatus) Charging RedLEDlonglit Chargefully RedLEDdisappeared...
- Page 13 7. Product specification Bluetoothversion V4.1 Bluetoothchipset CSR8670 Connectdistance ClassⅡ，10m Bluetoothprofile A2DP、AVRCP RX：AAC、SBC CODEC TX：apt-X LL、apt-X 、SBC Battery 400mAh/3.7V Chargingtime About2hours RXstatus：about60hours Standbytime TXstatusstandbytimeasthesameas workingtime SPDIF mode: about 14 hours Workingtime AUXmode:about17hours Workingtemperature -10---55℃ Netweight About44g Dimension 70*50*18.8mm...
-
Page 14: NotesAndFaq
Once switch the status, the pairing information for the former mode will be cleared up. So you only need to switch the status then power on, the paring list will be cleared up. E. What is the paring password ? If some devices connect with JPT2 need enter password, you can try to enter 0000 (four 0） F. If there are some problems such as can’t power on, connect failed, what ... - Page 15 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the JPT2 and is the answer not in the manual?
Questions and answers