Predator 63404 Owner's Manual & Safety Instructions page 8

Connecting Hoses
Note: Hoses not included.
NOTICE: Do not use any reducer on the inlet or
discharge port. However, if any reducers were
included as part of this pump, they may be used.
Note: The Intake Hose (not included)
MUST be reinforced with non-collapsible
construction. Match hose diameter to port
diameters. Do not reduce hose diameter size.
1. Thread intake hose onto Intake Port.
NOTICE: Use only a non-collapsible intake hose.
Intake Hose
Page 8 For technical questions, please call 1-888-866-5797.
2. Slide the Intake Strainer into the end of
the intake hose. Tighten until secure.
Intake Strainer
3. Thread discharge hose onto Discharge
Port. Tighten until secure.
ITEM 63404