Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Milesight Technology NVR Series
Summary of Contents for Milesight Technology NVR Series
- Page 1 Quick Start Guide V 4.05 www.milesight.com...
-
Page 3: Table Of Contents
Quick Start Guide Table of Contents 1.Package Contents ......................1 2.Hardware Overview ..................... 4 3.Interfaces ........................7 4.Installation ........................12 4.1 Mini (PoE) NVR 1000 Series Installation ............12 4.2 Pro/PoE NVR 5000 Series Installation ............... 15 4.3 Pro/PoE NVR 7000 Series Installation ............... 21 4.4 Pro NVR 8000 Series Installation .............. -
Page 4: Package Contents
Quick Start Guide 1.Package Contents Mini (PoE) NVR: MS-N1009-UT MS-N1009-UNT MS-N1009-UPT Contents Quick Start Guide Warranty Card Power Adaptor Power Adaptor Power Cord X 10 HDD Screw www.milesight.com... - Page 5 Quick Start Guide Pro/PoE NVR: Pro/PoE 5000 Series Pro/PoE 7000 Series Pro 8000 Series Contents Quick Start Guide Warranty Card Mouse Power Cord x 1 (Pro 5000 Series) Power Adaptor x 12 x 20 x 36 HDD Screw HDD Bracket HDD Bracket Screw Mounting Bracket Mounting Bracket...
- Page 6 Quick Start Guide SATA Cable x 1 (Pro 7000 Series) HDD Power Cable Terminal www.milesight.com...
-
Page 7: Hardware Overview
Quick Start Guide 2.Hardware Overview Mini NVR Series: MS-N1009-UT: 80mm 120mm 80mm MS-N1009-UNT: 115mm 180mm 115mm www.milesight.com... - Page 8 Quick Start Guide Mini PoE NVR Series: 115mm 180mm 115mm Pro/PoE 5000 Series: Pro/PoE 7000 Series: www.milesight.com...
- Page 9 Quick Start Guide Pro 8000 Series: www.milesight.com...
-
Page 10: Interfaces
Quick Start Guide 3.Interfaces MS-N1009-UT: MS-N1009-UNT: www.milesight.com... - Page 11 Quick Start Guide MS-N1009-UPT: MS-N5008-UT/MS-N5016-UT: MS-N5008-UPT: Alarm In PoE Port 1/3/5/7 Power Button Alarm Out AC 100-240V PoE Port 2/4/6/8 50-60HZ Audio Out HDMI Grounding www.milesight.com...
- Page 12 Quick Start Guide MS-N5016-UPT: MS-N7016-UH/MS-N7032-UH: RS-232 Power HDMI Audio In Alarm Out Lock Hole LAN1 AC 100-240V 50-60HZ LAN2 Alarm In Audio Out Grounding www.milesight.com...
- Page 13 Quick Start Guide MS-N7016-UPH/MS-N7032-UPH: RS-232 Alarm Out Audio In PoE Port AC 100-240V HDMI Lock Hole 50-60HZ Power PoE Port 2/4/6/8/10/12/14/16 Grounding Audio Out Alarm In MS-N8032-UH/MS-N8064-UH: AC 100-240V 50-60HZ Power Button www.milesight.com...
- Page 14 Quick Start Guide Lock Hole Audio In HDMI 2 HDMI 1 eSATA Alarm Out LAN 1 RS-232 LAN 2 VGA 2 Alarm In Grounding VGA 1 Audio Out www.milesight.com...
-
Page 15: Installation
Quick Start Guide 4.Installation 4.1 Mini (PoE) NVR 1000 Series Installation Step1: Remove the screws at the bottom panel and pull up the casing. Step2: Insert SATA HDD in the slot as required. (Mini NVR Series) - Page 16 Quick Start Guide (Mini PoE NVR Series) Note: MS-N1009-UT supports two SATA HDD (2.5”), MS-N1009-UNT and Mini PoE NVR supports one SATA HDD (3.5”). Step3: Secure the HDD with screws. (Mini NVR Series)
- Page 17 Quick Start Guide (Mini PoE NVR Series) Step4: Put back the casing and tighten the screws. www.milesight.com...
-
Page 18: Pro/Poe Nvr 5000 Series Installation
Quick Start Guide 4.2 Pro/PoE NVR 5000 Series Installation Step1: Using a cross screwdriver to remove the screws at the rear panel in an anticlockwise direction. (Pro 5000 Series) (PoE 5000 Series) www.milesight.com... - Page 19 Quick Start Guide Step2: Slide the upper casing to the right first and lift it up. Step3: The internal structure of Pro/PoE 5000 Series is shown as below. (Pro 5000 Series) www.milesight.com...
- Page 20 Quick Start Guide (PoE 5000 Series) Step4: Hard Disk Installation: Lock the hard disk with the HDD bracket. 6 screws for each hard disk installation. www.milesight.com...
- Page 21 Quick Start Guide Step5: Secure the HDD brackets with hark disks in the casing. 4 screws for each HDD bracket. (Pro 5000 Series) (PoE 5000 Series) www.milesight.com...
- Page 22 Quick Start Guide Step6: After that, check if all the screws are tightened. Then connect the power cable and data cable to each HDD. (Pro 5000 Series) (PoE 5000 Series) www.milesight.com...
- Page 23 Quick Start Guide Step7: Pull down the upper casing and slide it to the left. Step8: Retighten the screws on the rear panel. (Pro 5000 Series) www.milesight.com...
-
Page 24: Pro/Poe Nvr 7000 Series Installation
Quick Start Guide (PoE 5000 Series) 4.3 Pro/PoE NVR 7000 Series Installation Step1: Using a cross screwdriver to remove the screws at the rear panel in an anticlockwise direction. (Pro 7000 Series) www.milesight.com... - Page 25 Quick Start Guide (PoE 7000 Series) Step2: Slide the upper casing to the right first and lift it up. Step3: The HDD bracket is rotatable and can be taken down by pulling up and rotating one side of it. www.milesight.com...
- Page 26 Quick Start Guide (Pro 7000 Series) (PoE 7000 Series) Step4: To install HDD more conveniently, you can： 1) Remove the bracket. www.milesight.com...
- Page 27 Quick Start Guide (Pro 7000 Series) 2) Install the HDD on the bracket. 3) After securing the HDD on bracket, insert the bracket back to the NVR. www.milesight.com...
- Page 28 Quick Start Guide (PoE 7000 Series) Step5: Check if all the 16 screws in HDD bracket are screwed tightly, if not, screw them tightly in an clockwise direction. And fix the bracket with a screw in the middle of bracket. Then connect the power cable and data cable to each HDD.
- Page 29 Quick Start Guide Step6: Pull down the upper casing and slide it to the left. Step7: Retighten the screws on the rear cover. (Pro 7000 Series) www.milesight.com...
-
Page 30: Pro Nvr 8000 Series Installation
Quick Start Guide (PoE 7000 Series) 4.4 Pro NVR 8000 Series Installation Step1: Using a cross screwdriver to remove the screws at the rear panel in an anticlockwise direction. (Pro 8000 Series) www.milesight.com... - Page 31 Quick Start Guide Step2: Slide the upper casing to the right first and lift it up. Step3: Using the screwdriver to remove the screw in the middle of HDD bracket in an anticlockwise direction (Pro 7000 has only one HDD bracket and Pro 8000 has two, while the installation steps are the same).
- Page 32 Quick Start Guide Step5: Secure the HDD with 4 screws. Don’t screw tight and leave about 4mm distance at the side of each screw nut. As the enlarged drawing shows: Step6: After securing each HDD with 4 screws, stuck the side with screw nuts in the bracket’s slots and then slide down to fix the HDD in the bracket.
- Page 33 Quick Start Guide tight with screwdriver. Step7: Repeat the above steps to install HDD in the bracket. Remember to check if you have screwed tight. Step8: Secure the 16 screws in HDD and fix the bracket with a screw in the middle of it.
- Page 34 Quick Start Guide Step9: Pull down the upper casing and slide it to the left. Step10: Retighten the screws on the rear panel. www.milesight.com...
- Page 35 Quick Start Guide (Pro 8000 Series) www.milesight.com...
-
Page 36: Connection Overview
Quick Start Guide 5.Connection Overview Connect different devices to the interfaces of NVR, taking Mini (PoE) NVR Series and PoE 7000 NVR Series for example: (Mini NVR Series) (Mini PoE NVR Series) www.milesight.com... - Page 37 Quick Start Guide (PoE 7000 Series) www.milesight.com...
-
Page 38: Ready To Start
Quick Start Guide 6.Ready to Start Press the power button(this button is not available on Mini PoE NVR Series), the LED Indicator will light steadily when it is connected to a power source, taking Mini NVR Series and PoE 7000 NVR Series for example:... - Page 39 Quick Start Guide Note: Milesight 4-CH/8-CH/16-CH Plug and Play NVR features 4/8/16 independent PoE Ports. The software can automatically detect and configure the network cameras just after being plugged the cable, greatly eliminating the need for much time and expertise, and achieving a virtually hassle-free installation process.
-
Page 40: Access To Nvr
Quick Start Guide 7.Access to NVR 7.1 Search the NVR via Smart Tools If the IP address of the NVR is unknown, please use the Smart Tools to search the IP address. Smart Tools can automatically detect online Milesight NVRs connected in the LAN. -
Page 41: Via Web
Quick Start Guide Step3: Click on your NVR in the list (marked as 3), then you can change the parameters including the IP address, Port, Netmask, Gateway and DNS. Click on “Modify” button to apply the settings. (Default IP address of NVR is 192.168.5.200. -
Page 42: Live View
Quick Start Guide Note: 1. If the HTTP Port number is not the default number 80, please input the IP address as follows: http://IP:Port 2. If it’s your first time to access to NVR via WEB, please install the plug-in. And please close the browser before installing the plug-in. -
Page 43: Via Monitor
Quick Start Guide Note: About other configurations, you can refer to the user manual of NVR. 7.3 Via Monitor There is another way to access to NVR which you can use the HDMI cable to let the NVR combine with monitor. (Default user name and password of NVR are “admin”... - Page 44 Quick Start Guide wizard. Details are shown as follows: Password Modifying Time Setting www.milesight.com...
- Page 45 Quick Start Guide Network Setting Hard Disk Setup Click RAID to set up RAID for selected disk. RAID is available for Pro/PoE 7000 Series and Pro 8000 Series. www.milesight.com...
- Page 46 Quick Start Guide Note: RAID will be available after it was enabled and the device rebooted. Camera Adding www.milesight.com...
- Page 47 Quick Start Guide Record Setting Also you can skip the wizard to login directly. Then add cameras in Camera interface. Details are shown as follows: www.milesight.com...
- Page 48 Quick Start Guide Camera Management Camera Search 1. Select IP Range, NIC and Protocol, which includes ALL, ONVIF and MSSP. 2. Click search button to search cameras at the same LAN with NVR. 3. Select one channel, click Add button, input password and click Add button to finish 4.
- Page 49 Quick Start Guide After adding cameras successfully, you can back to the Live View to preview. www.milesight.com...
- Page 50 Quick Start Guide NVR Series Thank you for choosing Milesight Product © 2018 Milesight Technology Co., Ltd. www.milesight.com...
Need help?
Do you have a question about the NVR Series and is the answer not in the manual?
Questions and answers
מה הסיסמה של המכשיר
The default password for the Milesight Technology NVR Series device is “ms1234”.
This answer is automatically generated