No Signal (Option Not Shown); Help Call/Clear; Charging The Care Manager - RF Technologies Code Alert Care Manager In-Service Manual

Chapter 1: Operations
No Signal
If the Care Manager is taken out of range and loses its signal, NO SIGNAL is displayed and
menu items disappear. Selecting this field has no action. Bringing the Care Manager back in
range brings back menu items.

Help Call/Clear

HELP CALL and CLEAR are direct action options that toggles between the two. When
HELP CALL is displayed, selecting it initiates an alarm for help. Once selected, the option
changes to CLEAR. The Care Manager continues to send out the alarm message until you
select CLEAR.

Charging the Care Manager

To charge the Care Manager, plug the AC end of the charge adapter into a working
electrical outlet. Connect the other end to the power jack on the side of the Care
Manager. When the Care Manager is plugged into the charge adapter, the RF
Technologies Code Alert information window is displayed indicating OFF DUTY
and the charge status, CHARGING or FULL CHARGED.
The Care Manager can be manually configured to function "ON DUTY with the
scroll menu and will link up with a Gateway on the same channel.
1. Press MENU then select Configuration
2. Select On/Off.
3. Select ON DUTY and Save.
The Care Manager window goes blank once the Care Manager is disconnected
from the charge adapter. The blank screen indicates that the Care Manager is in
Sleep Mode. When the Care Manager is in Sleep Mode, any activity on the thumb
wheel "wakes up" the Care Manager and activates the Main Menu.
6
(option not shown)
Code Alert Care Manager (0510-1067-B) - In-Service Manual