Advertisement
Quick Links
SH252 Wireless BBQ Thermometer
User Manual
Thanks for having purchased SH252 Wireless BBQ Thermometer which
consists of a monitor, a transmitter and one
temperature sensor wrapped in stainless steel probe
Base on the 433MHz transmission principle, SH252 helps you monitor
.
the meat cooking status remotely. Bring simplicity, flexibility, intelligence and happiness to your barbeque time.
To ensure using this product correctly, please read this manual before operation. Please also be sure to keep this manual
well for future reference.
Product appearance
Product description
* Monitor
1.Three roast modes: Recipe, Target Temperature and Time for option.
2. Display current temperature of the food, target temperature, percent rate of BBQ process or countdown.
3. Monitor and control via touch screen with acoustic-optic alarm.
4. Stand on table or hanging on the grill device are compatible.
5. Product dimension: L110* W84* H27mm (L43.3* W33.1* H10.6 inch)
6. Power supply: 3pcs AAA alkaline batteries (3* UM-3 *1.5V)
* Transmitter
1. Support two channels working synchronously. Dual D2.5mm sensor sockets locate on side.
℉
℉
2. Temperature measurement range: 0℃~ 200℃ (32
~392
), ± 3℃
3. The transmitting interval is 4 seconds. The transmission distance is 30 meters or above.
4. Light and sound alarm when food is cooked well.
5. Product dimension: L105×W68×H18mm (L41.3* W26.8* H7.1 inch)
6. Power supply: 2pcs AAA alkaline batteries (2*UM-3 *1.5V)
Advertisement
Summary of Contents for FMG SH252
-
Page 1: Product Description
Base on the 433MHz transmission principle, SH252 helps you monitor the meat cooking status remotely. Bring simplicity, flexibility, intelligence and happiness to your barbeque time. - Page 2 *Two operation methods: With or without transmitter. - Work with transmitter, it is regarded as a Wireless Meat Thermometer which supported by RF 433Mhz. - Work without transmitter, it is regarded as a Digital Meat Thermometer which no remote function. * Three roast modes: Recipe Options, Timer Function and Temperature Alerts.
- Page 3 Function buttons on the monitor SET button: Touch it to set parameters. Push and hold it for 3s to erase the memory and back to sleep status. △ button: When in setting status, touch it to increase one. When in other status, touch it to change channel between CH1 and CH2.
-
Page 4: Product Registration
Product registration If it is the first time to use the transmitter, please finish the registration between the transmitter and monitor. -Once install 3pcs batteries to the monitor, there will be 120s auto-searching for remote signal while flashing on right top of screen. -Load 2pcs batteries to the transmitter quickly, touch the power button , the ring lambs flash in cycle. - Page 5 3. Target Temperature Mode When Target Temperature Mode is selected, touch △/▽to temperature from set countdown hour from 0℃～ 200℃. Touch SET to confirm. The max target temperature is 200℃. The target temperature is showing under the current temperature. The thermometer supports max two channels. Please set the cooking data for each channel separately. * Start the cooking Place the food on grill.
-
Page 6: Packing List
Take the two probe sensors out and plug them correctly. * Once the probes plugged into the channels of thermometer monitors, the thermometer switched to wire working version automatically. Packing List Monitor Transmitter Probe sensor Manual Battery 5pcs www.fmg-tech.com sale@fmg-tech.com...