Operation - ION Stadium Quick Start Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
11. NFC (near-field communication): Touch and briefly hold your supported and enabled
device to the NFC logo to pair the device. See
more information.
12. Power Cable Input (rear panel): Insert the included power adapter here to charge the unit.
The Lightning Bolt icon illuminates when the power adapter is connected. Please note
that when the power adapter is connected, the battery will still charge while the unit is in
use.

Operation

Connecting a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Stadium and it will automatically go into pairing mode to search for Bluetooth
devices. You will know you are in pairing mode when the Bluetooth icon is off. *
3. Navigate to your Bluetooth device's setup screen, find "Stadium" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. The Bluetooth icon will be lit solid when a device is "paired" to Stadium. *
Note: Users should consider updating their OS if experiencing trouble with pairing or
playing music.
5. Tap the Bluetooth button to disconnect a paired Bluetooth device. *
6. To connect to another Bluetooth device, repeat Steps 3-4.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
* Tip: If you would like to disable (or enable) the voice prompts, press and hold the Bluetooth
button.
Pairing a Bluetooth Device Using NFC
NFC (near-field communication) allows data exchange from devices, such as pairing, by gently
bumping them together. Check in your device's manual to see if this feature is supported.
To use NFC to pair with Stadium:
1. In order to use NFC, your device must be turned on and unlocked.
2. Enter your device's Settings menu and check that NFC is turned On (one time step).
3. Power on Stadium.
4. Touch and briefly hold your device to the NFC logo located on Stadium's top panel.
5. Follow the pairing instructions that appear on your phone. If a passcode is required, enter
"0000".
6. To unpair, gently bump your device against the NFC logo.
6
Pairing a Bluetooth Device Using NFC
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents