Cup holder in the center console
To open: open the stowage compartment
X
(
page 250).
Y
To remove the insert: slide catches :
X
inwards in the direction of the arrow.
Remove the cup holder insert upwards.
X
To re-install the insert: place the insert in
X
the stowage space.
Slide catches : outwards in the direction
X
of the arrow until they engage.
You can remove the cup holder's rubber mat
for cleaning. Clean with clear, lukewarm water
only.
Reducer ; can be removed. Large and small
containers can then be placed in the cup
holder.
To remove: grasp reducer ; and pull
X
upwards in the direction of the arrow.
To insert: insert reducer ; into the cup
X
holder in the opposite direction of the arrow
and press it down firmly.
Bottle holder
Observe the "Important safety notes" in the
"Stowage compartments" section
(
page 249).
Y
To open: open the stowage compartment
X
(
page 250).
Y
To remove the insert: slide catches :
X
inwards in the direction of the arrow.
Lift bottle holder insert ; up and remove.
X
To re-install the insert: place insert ; in
X
the stowage compartment.
Slide catches : outwards in the direction
X
of the arrow until they engage.
The bottle holder does not secure the bottles;
it merely prevents them from tipping over.
Sun visors
Overview
G
WARNING
If the mirror cover of the vanity mirror is fol-
ded up when the vehicle is in motion, you
could be blinded by incident light. There is a
risk of an accident.
Always keep the mirror cover folded down
while driving.
:
Mirror light
Bracket
;
Features
253
Z