Presentation The new P-KUBE 2 safety handle, mounted in combination with the NG series RFID safety switch with block, creates an integrated protection closing system with relating control of access to dangerous areas; such new combination makes it possible to obtain, with one single device, an access control function complying with category 4, PLe according to EN 13849-1 or SIL3 according to EN 62061.
(supplied separately) and carry out the centring adjustments. Swing door aligned Sliding door aligned frontally with the upright frontally with the upright Sliding door axially aligned Swing door aligned axially with the upright with the upright Safety handles P-KUBE 2...
Safety handles P-KUBE 2 Error-proof padlockable option The lock-out device is activated by means of a simple vertical sliding action; such movement makes the padlock holes only accessible in a fully screened position, so as to exclude incorrect fitting of the padlocks. The padlock hole diameter is 7 mm and up to 9 padlocks can be fitted.
Safety switch with block and separate actuator. and separate actuator. and separate actuator. and separate actuator. With lock release. With anti-panic release With lock release and button. anti-panic release button. AP G0B-111P AP G0B-011P accessory sold separately Safety handles P-KUBE 2...
Page 6
Do not exceed an overall length of 500 mm between the release button and the switch. Safety modules CS series Pizzato Elettrica offers its customers a wide range of safety modules make considering the typical problems about the control of the safety switches and their real use conditions.
15 - 28 15 - 28 Safety handle AP G0B-011• Safety handle AP G0B-111• 0 - 40 102.5 12.5 51.7 51.7 14.5 15 - 28 15 - 28 All measures in the drawings are in mm Safety handles P-KUBE 2...
Need help?
Do you have a question about the P-KUBE 2 and is the answer not in the manual?
Questions and answers