Safety Guidelines - Num'axes EYENIMAL STREAM PET FOUNTAIN User Manual

WARNING: When using electrical devices, basic precautions must always be taken, including the following
instructions:
- Read the instructions thoroughly before using appliance.
- Keep out of reach of children.
-
Never allow animals to use the device unsupervised.
- Only use attachments recommended or sold by the manufacturer.
- Do not use outdoors. FOR INDOOR USE ONLY.
- Do not unplug by pulling on the power cord. To unplug, grasp the plug, not the power cord.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is
dropped or damaged in any manner.
- Always unplug any appliance when not in use, before putting on or taking off parts, and before cleaning.
Never pull power cord to remove from outlet.
- Makes sure that the adaptor has been unplugged from the socket before any attempt is made to handle the
device.
- Before connecting the device, check that the voltage indicated on the device matches the local mains
voltage.
- In the event of a problem with the pump, do not try to repair it yourself.
1) Lift off the top part of the bowl (Fig 1).
2) Take out and rinse the filter with fresh water before installing it in the fountain (Fig 2).
3) Install the filter in the area provided in front of the water pump. Carefully place the white face of the filter
towards the front part of the fountain.
4) Adjust to the desired power of the flow on the pump (towards "+" for a more powerful flow (Fig 3)).
5) Fill the bowl taking care to respect the minimum water level indicated inside the bowl (Fig 4).
6) Replace the top part on the fountain.
7) Connect the plug to the mains and wait 1-2 minutes for the pump to start.
8) Check the water level regularly. Add water when its level is at MIN.
Top part
Lower part
1
EN - User's Guide

Safety guidelines

Installation
Filter
White side
2
Flow adjustment
3
4
Water level
7