Advertisement
Quick Links
Advertisement
Summary of Contents for RC Logger Vantage 89153RC
- Page 1 Vantage FPV Headset INSTRUCTION MANUAL Model No.: 89153RC...
- Page 2 Read the entire instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage of the product, personal property and cause serious injury.
- Page 3 Introduction Thank you for purchasing the RC Logger Vantage FPV Headset. We hope that you will fully enjoy the immersive experience of the first person view world. The Vantage headset is light weight and super comfortable. Offering a 5" monitor,...
- Page 4 Parts Identification Adjustable head strap VIDEO IN MENU Battery holder Position adjustment Power connector Adjustable head strap for magnifying lens (velcro) Charging the battery Please use Charger 89155RC (sold separately) to charge up the provided battery pack. The charger’s default setting is 2S. Connect the provided battery pack to the charger’s 5624 connector as shown below.
- Page 5 Power On the Goggle Before using the goggle, make sure the battery pack is fully charged. Slip the goggle's power cable through the head strap’s pocket. Using provided AV cable, connect the goggle to your video source. Video AV cable source Connect the provided battery pack (89152RC) with the 5624 power cable (you can also use your own 2S / 3S battery with the provided XT60 power cable).
- Page 6 Focus adjustment Once the power cable is connected to the battery, the goggle will be turned on. To adjust your focus, you can move the slider on 2 sides to adjust the magnifying lens position. The goggle’s OSD Menu displays the following adjustments. P ressing the MENU consecutively will cycle through these settings and back: Brightness...
- Page 7 1) Brightness When “BRIGHT” is shown on OSD, press the “+” or “-” button to adjust the brightness. After adjusting the brightness level, it will be saved automatically. Factory default setting is 50 2) Contrast When “CONTRAST” is shown on OSD, press the “+” or “-” button to adjust the contrast.
- Page 8 5) OSD’s Vertical Position When “MENU VP” is shown on OSD, press the “+” or “-” button to adjust the vertical position of OSD. After adjusting the OSD position, it will be saved automatically. There are 12 adjustable vertical levels. “1" is at the bottom. “12" is at the top. Below are some examples: Factory default setting is “1"...
- Page 9 Replacing Fresnel lens 1 piece of spare Fresnel lens is included in this package. In case you need to replace the lens, please follow below steps: * Textured side of the lens always facing the monitor Put back the lens module Slip the lens into the frame corners.
-
Page 10: Troubleshooting
The lens get fogged Moisture condensation Turn off the goggle and has occurred leave it for an hour before using it again Product Support For product support, visit our Online Ticket System at http://support.rclogger.com for any RC Logger inquiry. - Page 11 Spare Fresnel lens x 1pc Battery pack x 1pc 5624 power cable x 1pc XT60 power cable x 1pc AV cable x 1pc...
Need help?
Do you have a question about the Vantage 89153RC and is the answer not in the manual?
Questions and answers