EZG HW3000 User Manual

EZG HW3000 User Manual

Hog waller
Hide thumbs Also See for HW3000:

Advertisement

Quick Links

User Manual
Hog Waller
www.ezgmfg.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HW3000 and is the answer not in the manual?

Questions and answers

Summary of Contents for EZG HW3000

  • Page 1 User Manual Hog Waller www.ezgmfg.com...
  • Page 2: Product Description

    PRODUCT DESCRIPTION The machine is designed for scrubbing masonry and concrete walls. Our machine is not suitable for processing the object containing asbestos. You must abide by certain safety precautions when using the equipment. In order to prevent injuries and damages from occurring, you must always read through this operating manual carefully.
  • Page 3: Specifications

    SPECIFICATIONS Model No. HW3000 Power 800W No Load Speed 800-1700/min Abrasive Disc 7 in. / 178 mm Tube diameter 1.25 in. / 32mm Weight 4.2kg Protection class 1.800.417.9272 www.ezgmfg.com...
  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS The following symbols appear throughout these operating instructions: Indicates danger of injury, risk to life, and possible damage to the appliance if these instructions are not followed. Indicates the presence of electric shocks. Read through these operating instructions carefully before using the Hog Waller.
  • Page 5 SAFETY INSTRUCTIONS Always check if your mains voltage corresponds with the value on the type plate. The machine has been double-insulated in accordance with EN60745: therefore, an earth wire is not necessary. USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the information quoted on the tools identification plate.
  • Page 6: General Safety Rules

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
  • Page 7 GENERAL SAFETY RULES 2) Electrical Safety (continued) d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
  • Page 8 GENERAL SAFETY RULES 3) Personal Safety (continued) e. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
  • Page 9 GENERAL SAFETY RULES 4) Power Tool Use and Care (continued) e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
  • Page 10 PRECAUTION ON USING HOG WALLER Attention! You must abide by the following basic safety measures against electrical shocks, injuries and the danger of fire when using electric tools. Read and abide by these instructions before you start to use any tools. These instructions must be kept in a safe place.
  • Page 11 PRECAUTION ON USING HOG WALLER • Do not use damaged accessories. Before use, always check whether the accessories are nicked or cracked. For example, to grinding pad, please check the support plate is not cracked. Ensure everybody to be out of the machine’s rotation area and run the machine at maximum speed for one minute, which can fully test the accessories.
  • Page 12 HOW TO USE HOG WALLER Before setting up, repair or maintenance of the appliance you must always turn off the operating switch and pull out the mains plug! Before Initial Operation • Check if the rated frequency of the mains supply corresponds to the details of the type place.
  • Page 13 HOW TO USE HOG WALLER 6.2 Electronic Control This machine has the characteristics as below: • Lock-on switch [1-3] • Adjustable Speed [1-4] Adjust the speed from 800-1700rpm by turning the speed wheel [1-4]. In this way, user can choose a different speed.
  • Page 14 HOW TO USE HOG WALLER 6.3 Replace Abrasive Disc [1-5] • Insert the hex wrench (size 5) into the hexagonal screw bolt on the sanding pad. • Hold the Abrasive disc firmly, and then turn the wrench to dismount the pad. •...
  • Page 15 HOW TO USE HOG WALLER 6.4 LED [1-7]; [1-8] LED light,3.8W can work in a dark environment. LED light can be adjusted on every side. 1.800.417.9272 www.ezgmfg.com...
  • Page 16 HOW TO USE HOG WALLER 6.5 Suction Power Adjustment [1-9] Clockwise to reduce suction power, counter-clockwise to increase suction power. 6.6 Grinding Adjacent Edges [1-10] Detachable brush segment can reach up to the adjacent edge with ease. 1.800.417.9272 www.ezgmfg.com...
  • Page 17 HOW TO USE HOG WALLER 6.7 To Change the Dust Hose [1-11] • Loosen the hoop by the screwdriver, take out the dust hose • Counterclockwise rotation of the dust hose [1-12] 1.800.417.9272 www.ezgmfg.com...
  • Page 18: Operate The Machine

    HOW TO USE HOG WALLER 6.8 Disassemble the extension rod [1-13] When disassembling the extension rod, pls must press the limited knob, then take out the extension rod. OPERATE THE MACHINE • Do not control the machine’s head. • Hold the machine with both hands. •...
  • Page 19: Care And Maintenance

    CARE AND MAINTENANCE Remove the plug from the socket before carrying out any adjustment, servicing or maintenance. Your power tool requires no additional lubrication or maintenance. Always store your power tool in a dry place. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Page 20 CORRECTIVE ACTION IN CASE OF FAILURE (1) The operating switch is switched on, but the motor is not working. • Wires in the mains plug or in the socket are loose: Have socket and plug checked or repaired • The switch is faulty: Have the switch replaced.
  • Page 21: Environmental Protection

    LABELS ON YOUR TOOL (if any) Volts Alternating current No load speed Class II tool Wear Ear Protection Hertz Watts Revolutions or reciprocation per /min or min minute To reduce the risk of injury, user must read instruction manual Wear Eye Protection Always Wear A Breathing Mask With This Tool ENVIRONMENTAL PROTECTION...
  • Page 22 HOG WALLER PARTS LIST Part #09-159 Part #09-3135 Part #HW-500 Flat Washer Bolt Arbor Part Part #HW-3000-DB Part #HW-3000-GU #HW-3000-VA Double Strap Guard Assembly Vacuum Vacuum Bag w/ Bolts Assembly Part #HW-30000-EH Extended Handle 1.800.417.9272 www.ezgmfg.com...
  • Page 23 HOG WALLER PARTS LIST Part #HW-3000V-H Vacuum Hose Assembly Part #HW-001 Disc Wrench - 10mm Part #11-127 Abrasive Grinding Disc - Type 28 Part #HW-3000-VH-B Vacuum Hose Assembly B 1.800.417.9272 www.ezgmfg.com...
  • Page 24: Warranty Registration

    TO VALIDATE YOUR MANUFACTURER’S WARRANTY FOR ALL EZG MANUFACTURING PRODUCTS. WARRANTY PROVISIONS OF THIS MACHINE ARE HANDLED DIRECTLY THROUGH THE MANUFACTURER. EZG MANUFACTURING * 1833 North Riverview Road, Malta, OH 43758 PHONE 1-800-417-9272 * Email: warranty@ezgmfg.com * FAX 740-962-2037 1.800.417.9272 www.ezgmfg.com...
  • Page 25 1.800.417.9272 www.ezgmfg.com...

Table of Contents