Download Print this page

DT Research DT430 Basic Operation Manual

Handheld pos terminal

Advertisement

Quick Links

DT430
 
SPECIFICATIONS
 
System
Processor 
ARM 800 MHz 
RAM 
512MB 
Storage 
4GB Flash 
Operating System 
Microsoft® Windows® CE 6.0; Windows® Mobile 6 
Display 
4.3" TFT‐LCD with resistive touch; outdoor‐viewable display 
Display Resolution 
272 x 480 (WQVGA) 
Network Interface 
Built‐in IEEE 802.11a/b/g/n WLAN and Bluetooth 2.1 with EDR 
Control Switch and Button 
1 power button, 4 front buttons 
Indicator 
1 power‐on LED indicator, 1 WLAN enable/ communication indicator 
Speaker/ Microphone 
Built‐in speakers; 1 mono microphone 
Input/Output Ports 
1 headset jack, 1 USB 1.1 host, 1 cradle interface (USB2.0 and charging), 1 DC‐in jack 
 
Power
 
AC/DC Adapter
Input: 100 – 240V AC; Output: 5V DC, 3A
 
Battery Type
Li‐ion battery 3760 mAh, 3.7V
 
Mechanical
 

Enclosure
PC+ABS, TPR
 
Stylus
Non‐electronic tip
Dimensions (H x W x D)
6.3 x 3.4 x 1.2 in/ 160 x 86 x 30 mm
 

Weight
0.9 lbs/ 415 g
Environmental
 
Regulatory 
FCC Class B, CE, C‐Tick, RoHS compliant 
Operating Temperature 
Operation: 0°C ‐ 40°C; Storage: ‐20°C ‐ 60°C 
 
Humidity
0% ‐ 90% non‐condensing
* Specifications subject to change without notice
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2012, DT Research, Inc. All Rights Reserved.
DT Research is a registered trademarks of DT Research, Inc.
4
ENGLISH





http://www.dtresearch.com
DT430
BASIC OPERATION GUIDE
ENGLISH
 
INTRODUCTION
Thank you for acquiring the DT430, part of the POS 
Handheld line. The DT430 offers a 4.3" outdoor‐viewable 
display, in a compact, rugged, and lightweight package. 
The DT430 enables efficient point‐of‐service applications, 
inventory management, and field services.    The DT430 
Point‐of‐Service Handheld provides the precise features needed to streamline 
operations and improve productivity, data accuracy, and service. 
PACKAGE CONTENTS 
1. One DT430   
2. One battery pack 
3. Basic operation guide 
4. Stylus lanyard and hand strap 
PRECAUTIONS
Always exercise care when operating and handling the DT430. 
Do not disassemble any portion of the DT430. It will void any product warranty on 
DT430. 
Do not use any power adapter or charging cradle other than the one provided with 
the device or acquired from the manufacturer or its partners. 
In  the  unlikely  event  that  abnormal  noise,  strange  odor,  or  smoke  is  present, 
immediately  power  down  the  DT430  and  disconnect  all  power  sources.  Please 
report the problem to your device provider immediately.
Product  label  is  on  the  battery  compartment;  it  will  be  seen  while  loading  the 
battery.
 

Advertisement

loading
Need help?

Need help?

Do you have a question about the DT430 and is the answer not in the manual?

Questions and answers

Summary of Contents for DT Research DT430

  • Page 1  Do not use any power adapter or charging cradle other than the one provided with  the device or acquired from the manufacturer or its partners.   In  the  unlikely  event  that  abnormal  noise,  strange  odor,  or  smoke  is  present,  immediately  power  down  the  DT430  and  disconnect  all  power  sources.  Please  DT Research, Inc. report the problem to your device provider immediately. 2000 Concourse Drive, San Jose, CA 95131 http://www.dtresearch.com ...
  • Page 2 DT430 DT430 I/O Ports  DT430 LED Status Indicators 1. Power Mode Status Indicator:  .Left                      Front                                              Rear                                 ...
  • Page 3 FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 4 4 4 4 4 RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.