1. Manuals
  2. Brands
  3. ClimbTech Manuals
  4. Cables and connectors
  5. SWY100N-MTU
  6. Operation and instruction manual

ClimbTech SWY100N-MTU Operation And Instruction Manual

Swivel anchor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OPERATION AND INSTRUCTION MANUAL
Swivel Anchor Model: SWY100N-MTU
NOT FOR FALL PROTECTION
Patent # US 8,424,638
WARNING:
ALL PERSONS USING THIS EQUIPMENT MUST
READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO
SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD
BE FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS
EQUIPMENT. ALL INDIVIDUALS WHO USE THIS PRODUCT MUST
BE PROPERLY INSTRUCTED ON HOW TO USE THE DEVICE. AVOID
CONTACT WITH PHYSICAL HAZARDS (THERMAL, CHEMICAL,
ELECTRICAL, ETC.). MAKE ONLY COMPATIBLE CONNECTIONS.
V1.0-A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SWY100N-MTU and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ClimbTech SWY100N-MTU

  • Page 1 OPERATION AND INSTRUCTION MANUAL Swivel Anchor Model: SWY100N-MTU NOT FOR FALL PROTECTION WARNING: ALL PERSONS USING THIS EQUIPMENT MUST READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS EQUIPMENT.

  • Page 2: Use Requirements

    Misuse or failure to follow warnings and instructions may result in serious personal injury or death. PURPOSE The SWY100N-MTU is an anchorage connector designed to function as a lift point or other nonlife dependant applications. Any references to “anchorage connector” in this manual include, and apply to, the SWY100N-MTU.
  • Page 3 LABEL LOCATIONS 180° 2.25”ø 8”ø (57.15mm) (203.2mm) 5.5” (139.7mm) 360° 3” 1” (76.2mm) (25.4mm) Tensile Strength (UTS): 10,000-lbf (44kN) Working Load: 2,000-lbs (907kg) Weight: 1.2-lbs (544.3g) Materials: Zinc Plated Steel LOADING CONDITIONS DIAGRAM LOAD LOAD LOAD LOAD ACCEPTABLE ACCEPTABLE IMPROPER ACCEPTABLE...
  • Page 4 STEEL MOUNTING 1. Use a proper drill and bit for steel. 2. Drill a 5/8” (16mm) hole no less than .75” (6mm) deep 3” (76mm) away from any edge. 3. Hole must be straight and perpendicular to surface. 4. Hole must be free of debris. 5/8”-11 Lock Nut 5/8”...

  • Page 5: Concrete Mounting

    CONCRETE MOUNTING 1. Use a proper drill and bit for concrete (SDS drill bit). 2. Drill a .75” (19mm) hole no less than 5” (114mm) deep 9” (229mm) away from any edge. 3. Hole must be straight & perpendicular to surface. 4.
  • Page 6 WELD ON MOUNTING Grade - 5 or 8 bolt 5/8”-11 x 1-3/4” Internal Tooth Lock Washer Torque Range: 75 to 90 ft-lbs (100-120Nm) Weld Puck * Weld (AISI 1018) 3/8” min (9.5mm) * Welding procedure must be approved by an engineer or other qualified person to be compatible with any and all structural &...
  • Page 7 STRAIGHT LOOP INSERT See Straight Loop Insert Manual for anchorage casting instructions. 1. Strip decking to expose the Straight Loop Insert. 2. Ensure that anchorage was properly installed. Orange indicator should be flush with concrete surface, and at least 9” from any edge or corner. Concrete should be at least 6”...
  • Page 8 KIT CONTENTS PART NUMBER SWY1SBA-400-CTS (Steel Mounting Hardware Kit) SWY100S-MTU-CTS (Swivel with Steel Mounting kit) SWY1PBA-325-CTS (Straight Loop Insert Mounting Kit) SWY100P-MTU-CTS (Swivel with Straight Loop Insert Mounting kit) SWY1CSA-55P-CTS (Concrete Hardware Kit) SWY100C-MTU-CTS (Swivel with Concrete Mounting Kit) SWP100N-KIT-CTS (Weld-on Mounting Kit) SL4625C-ZNO-CTS (Straight Loop Insert)

  • Page 9: Maintenance, Cleaning And Storage

    MAINTENANCE, CLEANING AND STORAGE Cleaning periodically will prolong the life and proper functioning of the product. The frequency of cleaning should be determined by inspection and by severity of the environment. Clean with compressed air and/or a stiff brush using plain water or a mild soap and water solution. Do not use any corrosive chemicals that could damage the product.
  • Page 10 NOTES...
  • Page 11 NOTES...
  • Page 12 LIMITED REMEDY: Upon notice in writing, ClimbTech will repair or replace all defective items at ClimbTech’s sole discretion. ClimbTech reserves the right to require that the defective item be returned to its plant for inspection before determining the appropriate course action. Warranty does not cover equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other damage beyond the control of ClimbTech.

Table of Contents