SAFETY PRECAUTIONS * This product is designed for use in moderate climates. Do not use or install this unit where it would be exposed to direct sunlight or in extremely hot temperatures, or near a radiator, stove or appliance that produces heat. * Do not take this unit into the bathroom, or near a swimming pool.
the product (reconnect of power source may be required) to resume normal operation. We certify that the power supply is used as a device for disconnecting the power distribution network, which should stay easily accessible. CAUTION: To reduce the risk of electric shock. Do not remove the cover (or back).
anywhere warm and damp, or if you move the unit from somewhere cold (e.g. Your car boot) to a warm room. In this case, let the unit stand for 1-2 hours, or gradually increase the room temperature so the unit is dry before you use it. * Do not place it where it could be subject to vibration.
PREPARATION FOR USE Carefully unpack the Main unit from its carton; you should have the following items: Packing included Main Unit. 2pcs Speakers User Manuel 5V 2A adapter RCA cable If any of these items are missing, consult your dealer. Keep any packaging in case you want to transport the main unit at some later date.
Notes : * Do not put anything other than a CD in the compartment. Other objects can damage the mechanism. * Do not force open/close the CD gate by hand at any time. * Keep the CD gate closed when not in use to prevent dirt and dust from getting into the mechanism.
Page 9
automatically .Then put down the lever, the tone arm would drop and touch record surface gently. Now users can enjoy their favorite songs. -Push the arm lift lever up to raise the arm, now platter will still running but play will pause. To continue the play, user just need to put down the lever.
Note: Do not stop or turn the platter manually. Moving or jarring the turntable without securing the tone arm clamp could result in damage to the tone arm Replace the protective cap on the stylus when not in use. USING THE FM/AM RADIO - Press POWER button to turn on the unit.
During pairing, please make sure the device is within 10 meter of the unit. - And then you will find TURN-200 from the searched list. Choose it and connect it. - If required, enter the password 0000. Select OK or YES to pair the two units.
TECHNICAL SPECIFICATIONS AMPLIFIER Output Power 5W + 5W Frequency Response 60 to 20kHz PHONO Drive System Belt Drive Speed 33-1/3rpm, 45rpm, 78rpm More than 35dB SPEAKER SYSTEM Impedance 2 ohm Input Power Max. 5W GENERAL Power Supply DC 5V 2A Power Consumption Dimension Main unit: L320 x W278 x H160 mm...
TROUBLE SHOOTING Problem Possible cause Solution The unit does The unit is disconnected Connect to the DC outlet not respond from the DC outlet. (no power) No sound Volume not adjusted. Adjust the volume level. Wrong source selected. Select the correct source. No device installed.
Page 14
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the TURN-200 and is the answer not in the manual?
Questions and answers