Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Fujisoft +F FS020U
-
Page 1: User Manual
FS020U USB MODEM User Manual... -
Page 2: Table Of Contents
Table of Contents User Manual ................. 1 1 Introduction ................3 2 Description for Client Interface ..........4 Activate Client ..............4 Introduction to Interface............5 3 Connection ................7 Automatically connect to the network ........7 Customized Network Connection ......... 7 4 Setting .................. -
Page 3: Introduction
1 Introduction The product is designed to enable PC users access to the Internet via GPRS/EDGE/UMTS/HSPA/LTE networks. It uses a standard USB interface for a fast simple connection to your PC. The modem’s firmware includes the following features: Wireless Internet connection ... -
Page 4: Description For Client Interface
2 Description for Client Interface Activate Client To activate client, please double-click the shortcut icon of client on the desktop. Note: Operational Instruction for PIN: If the user activates PIN under the setting menu, it shall be required to input the correct PIN while using the application procedure (totally 3 times to input PIN, if the number is wrongly-input after 3 times, thus, PUK should be used to decode the PIN, and the input of PUK is only 10 times, if the... -
Page 5: Introduction To Interface
Introduction to Interface 1. Function Icon The definition of function icon provided by client is as follows: Shortcut icon Description Connection Setting Network recording 2. Status Information The status information displayed by client is as follows: Status Description Information Indicates the signal strength of Network signal the current connected network ... - Page 6 found. Display “No (U)SIM ” when the (U)SIM can’t be found. Display “Invalid” when the (U)SIM is invalid. Device and Display “Searching” when searching the Network information network. Display “No service” when the network can’t be found. ...
-
Page 7: Connection
3 Connection Auto-connection and customized-connection modes are provided to access to the network. Automatically connect to the network If using the default connection configuration, you should connect by dialing according to the default connection profiles. 1. Connect Select connection mode: click on <Connect> for auto connection. ... - Page 8 Note: Please contact the network operator for profile information. 2. Predefined List Select a profile in the predefined list and then add it into the connection profile list. 3. Edit Select one profile in the available list and then to edit. 4.
-
Page 9: Setting
4 Setting Connection Click on <Connection > to display available connection profile. 1. Sound Enabled/Disable sound prompts when Internet connection or disconnecting. 2. Connection Setting Please refer to “Connection”. For customized-connection network information PIN Management 1. Enabled PIN Click on <Enabled PIN> to select Enable/Disable and activate PIN launching or close dialog box;... -
Page 10: Language Setting
Input new PIN and re-input for confirmation, and click on <Ok>. Note: It can be allowed only the PIN enabled. Language Setting Click on <Language setting> to select language, and the window will display the selected language when restart the client. Network Connection Network Mode ... -
Page 11: Network Recording
5 Network recording Network recording The user can view the network recording. 6 FAQ Which operation systems does the software support? It supports Windows XP, Windows Vista, Windows 7. I cannot install applications？ The reasons are shown below: 1. If automatic installation unfinished, please check whether the antivirus and security software is working. - Page 12 The (U)SIM does not register any networks The reasons are shown below: 1. Unstable local signal; 2. The software is an old version; 3. Hardware problem. You may: 1. Try to logon from another location; 2. Update the software; 3. Check the hardware or use another data card and retry. Why does the prompt “Unavailable connection profile”...
- Page 13 (U)SIM Does it support roaming? This depends on the local operator. Please check with your local operator or service provider. Please make sure the temperature for device will not be higher than 55 ˚C The device could be used with a separation distance of 0.5cm to the human body.
- Page 14 FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 15 which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves.
- Page 16 output. SAR compliance has been established in the host product(s) (laptop computers), tested at 5mm separation distance to the human body, and tested with USB slot configurations including Horizontal-UP, Horizontal-Down, Vertical-Front, Vertical-Back. This device can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics.
Need help?
Do you have a question about the +F FS020U and is the answer not in the manual?
Questions and answers