Mouse - HP MH0GC Manual

Model
Keyboard(UH0G)/Mouse(MH0GC)/Dongle(DHN0)
3.1.2.4 Ergonomics
Key caps height profile meet DIN standard with height of C row under 30 mm. Legend printings in key cap is meet ANSI standard, which is
applying to all keys. The printed characters are visible within 30 cm distance from any viewing angle and contrast of printing exceeds 3:1.
Adjustable tilt legs located in lower casework allowing unit can be adjusted to comfortable angle for user to operate.Tactile feeling feedback for
users ensures proper make and break for each key press.
3.1.2.5 Gap for the Keyboard
The product state put on the standard surface or plate. Four corners must land at the same time than measure the distance
between the bulge(Rubber feet) and the surface with plug gauge. The gap ≦ 0.5mm
3.1.2.6 Keyboard operation force
The keyboard operation force is 150+/-30gf。

3.2Mouse

3.2.1 Operating force
Operating force of Left & Right Button: 75 ± 35 gf
Operating force of Middle Button: 150 ± 50 gf
Scroll rotate force: 30 ± 20 gf．Cm
Operating force of Slide Switch: 300 +/- 50 gf
Operating force of ID BUTTON: 80 ± 30 gf
3.2.2 Gap and Step
Form No.: DFE0-01-001-04(030701)