GE PVM2170 Owner's Manual page 19

Turntable On/Off
S
For best cooking results, leave the turntable on.
ETTINGS
It can be turned off for large dishes.
1
2
Vent Fan
Vent
The vent fan removes steam and other vapors
from surface cooking.
Press VENT FAN once for boost fan speed,
twice for high fan speed, three times for
medium fan speed, four times for low fan speed
or five time to turn the fan off.
Auto Nite Light
S The Auto Nite Light can be set to come on and
ETTINGS
go off at desired times.
1
2
3
Beeper Volume
S
Use to set the beeper volume level.
ETTINGS
1
2
Reminder
S
The reminder feature cn be used like an alarm
ETTINGS
clock to sound a beeper signal at a defined time
of day.
1
2
Press the Settings button.
Turn the dial to select Turntable ON/OFF. Press
the dial to enter.
Press the Settings button.
Turn the dial to select Auto Night Light. Press
the dial to enter.
Turn the dial to select to turn the feature off,
review the feature, or set the feature. Press the
dial to enter.
Press the Settings button.
Turn the dial to select Beeper Volume. Press
the dial to enter.
Press the Settings button.
Turn the dial to select Reminder. Press the dial
to enter.
3 Turn the dial to select Turntable ON or
Turntable OFF. Press the dial to enter.
Sometimes the turntable can become too hot
to touch.
Be careful touching the turntable during and
after cooking.
Automatic Fan
An automatic fan feature protects the
microwave from too much heat rising from the
cooktop below it. It automatically turns on if it
senses too much heat.
If you have turned the fan on you may find that
you cannot turn it off. The fan will automatically
turn off when the internal parts are cool. It
may stay on for 30 minutes or more after the
cooktop and microwave controls are turned off.
4
(If selecting to set the feature) Rotate the
dial to set the desired on and off times,
pushing the dial to select the times.
NOTE: Auto Night Light will not come on when
Energy Saver button is engaged. Auto nite light
will always activate the light to the night setting
at the programmed on time, even if the light is
already set to the bright setting. Auto nite light
will always turn the light off at the programmed
off time, even if you have turned the light to
bright.
Turn the dial to select to select the desired
3
volume level. Press the dial to enter.
NOTE: Some beeper noises will always be a pre-set
volume level and cannot be changed.
Turn the dial to select to clear, review or set the
3
reminder.
4
(If setting the reminder) Rotate the dial to
nter the desired time of day for the
reminder event to occur. Push the dial to
select the times.
GEAppliances.com
19