Setting up the Monitor set
Mounting on a table
1
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
2
Connect the Power Cord to a wall outlet.
AC-IN
3
Press
button on the front switch panel to
turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is
executed automatically.
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
10 cm
10 cm
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.
ASSEMBLING AND PREPARING
NOTE
5