Installation Instructions; Device Installation - SMC Networks SMC EZ Connect 2.4GHz 11 Mbps Wireless USB Flash Drive SMCWUSB32 User Manual

3 | Installation Instructions

- Device Installation

1) Select an available USB port on the PC
2) Make sure the cap of the SMCWUSB32 is pushed down so that the USB interface is
clearly visible
3) Carefully insert the USB adapter's Type-A plug (i.e., the flat plug) into the USB port
4) Press until it is firmly seated in the port
- Using the Laptop Clip and USB Extension Cable
1) Select an available USB port on the PC
2) Make sure the cap of the SMCWUSB32 is pushed down so that the USB interface is
clearly visible
3) Hold the cap in place while sliding the Laptop Clip onto the cap of the SMCWUSB32.
Make sure the Laptop Clip is held firmly in place.
4) Carefully insert the USB cable's Type-A plug (i.e., the flat plug) into the USB port and
press until it is firmly seated in the port
5) Insert the other end of the cable into the SMCWUSB32 11 Mbps Wireless USB Flash Drive