Summary of Contents for Hunno technologies MS3500
- Page 1 Fingerprint ID Mouse MS3500 Fingerprint ID Scanner MS2600 User's Manual Hunno Technologies Inc.
- Page 2 Fingerprint ID Mouse/Scanner MS3500/2600 Copyright (c) 1999-2002 Hunno Technologies Inc. All rights reserved. The copyright of this document belongs to Hunno Technologies Inc. No part of this document may be copied or reproduced by any means. MagicSecure is a registered trademark of Hunno Technologies Inc.
-
Page 3: Getting Started
MS3500/MS2600, which can be used on almost any surface without a mouse pad, guarantees fast recognition speed and accuracy. Strong durability of optical sensor shall be efficient for user's Cost Saving Policy. -
Page 4: Specifications
Fingerprint ID Mouse/Scanner MS3500/2600 Specifications Verification Time : 1.0 sec FRR : 0.01% FAR : 0.001% Size of Template : 256 byte Resolution : 500 dpi Communication : USB Power : DC 5V (Bus Power) System requirements Windows 98/ME, Windows 2000... -
Page 5: Software Installation
Fingerprint ID Mouse/Scanner MS3500/MS2600 Software Installation There are three device drivers that should be installed when MS3500(device name) is operated on Windows 98 : USB composite device, MS3500(driver name), and USB human interface device. Install MS3500 only when MS3500 is operated on Windows 2000/Window XP. - Page 6 Fingerprint ID Mouse/Scanner MS3500/2600 At the screen shown above, clicking Next will start the installation When the driver installation is complete and the screen indicating that Windows has finished installing USB composite device appears, click Finish. 2. MS3500/MS2600 At the Add New Hardware Wizard screen shown above, click Next.
- Page 7 Fingerprint ID Mouse/Scanner MS3500/MS2600 At the screen shown above, insert the MagicSecure CD and select CD ROM drive, and then click Next. Note: If the path to the CD ROM drive is not found Ensure that the CD has been inserted.
- Page 8 When the driver installation is complete and the screen indicating that Windows has finished installing MS3500/MS2600 appears, click Finish. 3. USB human interface device (MS3500) At the Add New Hardware Wizard screen shown above, click Next. At the screen shown above, select Search for the best driver for your device (Recommended), and then click Next.
-
Page 9: For Windows Me
Fingerprint ID Mouse/Scanner MS3500/MS2600 At the screen shown above, clicking Next will start the installation. When the driver installation is complete and the screen indicating that Windows has finished installing USB human interface device appears, click Finish. For Windows ME At the Add New Hardware Wizard screen shown above select Specify the location of the driver (Advanced), and then click Next. - Page 10 Fingerprint ID Mouse/Scanner MS3500/2600 When the driver installation is complete and the screen indicating that Windows has finished installing MagicSecure3500 appears, click Finish. For Windows 2000 (MS3500/MS2600) At the Found New Hardware Wizard screen shown above, click Next. At the screen shown above, select Search for a suitable driver for my device (Recommended), and then click Next.
- Page 11 At the screen shown above, clicking Next will start the installation. When the driver installation is complete, and the Completing the Found New Hardware Wizard screen for MS3500/MS2600 appears, click Finish. For Windows XP (MS3500/MS2600) At the Welcome to the Found New Hardware Wizard screen, select Install from a list or specific location (Advanced), and then click Next.
- Page 12 Fingerprint ID Mouse/Scanner MS3500/2600 When the driver installation is complete and the Completing the Fond New Hardware Wizard screen for MS3500/MS2600 appears, click Finish. - 12 - Hunno Technologies Inc.
Need help?
Do you have a question about the MS3500 and is the answer not in the manual?
Questions and answers