Download Print this page

Jaycar Electronics AC1736 User Manual

Hdmi extender over cat5e/cat6 hd baset

Advertisement

Quick Links

HDMI Extender over Cat5e/Cat6
(HD BaseT)
User manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the AC1736 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Jaycar Electronics AC1736

  • Page 1 HDMI Extender over Cat5e/Cat6 (HD BaseT) User manual...
  • Page 2 I. Introduction Extend UHD4k HDMI signals to a display 40m away or 1080p signals up to 70m from a HDMI source. This extender converts standard HDMI signals to HDBase T signals and transfers them over a common Cat 5E/6 cable. This is more affordable than long HDMI cable runs and allows for greater distances between a display and source.
  • Page 3 • Transfer Bidirectional Infrared control signal together with the HDMI signal. • Supports POE (Power over Ethernet) function, either TX or RX powered 12V @2.5A. The POE Power Consumption is less than 10W. • Use single UTP LAN cable (CAT-5E/6) to substitute HDMI cable to achieve long distance transmission.
  • Page 4 IV. Specifications Frequency Bandwidth 2.97Gbps HDMI Transmitter Input/Output Ports 1x HDMI Female port/1 x CAT6 1x IR Transmitter/1x IR Receiver HDMI Receiver Input/Output Ports 1 x HDMI Female port/1 x CAT6 1x IR Transmitter/1x IR Receiver Power Supply DC 12V 2.5A ESD Protection Human Body Model: ±...
  • Page 5 Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F Relative Humidity 20 ~ 90% RH (Non-condensing) Power Consumption (Max) Transmission distance: 40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit 4K x 2K@30Hz@24bit. 70 meters: 1080P @60Hz36bit;...
  • Page 6 V. Operation controls and Functions Transmitter DC IN: Plug the 12V DC power supply into the unit. Power supply can be connected to either Transmitter or Receiver. IR OUT: Chanel 1 IR Receiver. IR IN: Chanel 2 IR Emitter. HDMI IN: HDMI Input port.
  • Page 7 HDMI Signal OUT: Standard HDBase T signal output port (Cat6 Socket) LINK LED: This red LED illuminates when the Transmitter and Receiver are connected. Receiver DC IN: Plug the 12V DC power supply into the unit. Power supply can be connected to either Transmitter or Receiver. IR IN: Chanel 1 IR Emitter.
  • Page 8 VI. Application Example...
  • Page 9 Distributed by: TechBrands Electus Distribution Pty. Ltd. 320 Victoria Rd, Rydalmere NSW 2116 Australia Ph: 1300 738 555 Int’l: +61 2 8832 3200 Fax: 1300 738 500 www.techbrands.com...