Summary of Contents for eXact PipeBevel 220E
- Page 1 PipeBevel 220E/360E System Operating Instructions 5-16 patents: US 7,257,895, JP 4010941, EP 1301311, FI 108927, KR 10-0634113...
- Page 2 Exact PipeBevel 220E/360E System Blade tip information for Exact PipeBevel There are two different types of blade tips for Exact PipeBevel machines: Safety english - Exact Bevel Tip Universal xxx for steel and aluminium - Exact Bevel Tip Stainless yyy for stainless steel Additional specic safety...
-
Page 3: Table Of Contents
The technical le is available at the address underneath. Safety The person authorized to compile the technical le: For more information, please contact Exact Tools at the following address. The technical file is Blade tip information for Exact PipeBevel 220E/360E Safety instructions Mika Priha, R&D manager (mika.priha@exacttools.com) -
Page 4: Technical Data
In addition to these instructions, always follow the of cial In addition to these instructions, always follow the official work, health and safety regulations. work, health and safety regulations. The Exact PipeBevel 220E/360E is meant for The Exact PipeBevel 220E/360E is meant for professional use only. -
Page 5: Safety
Safety english Safety english 4. Power tool use and care Particular requirements for General power tool safety (RCD) protected supply. Use of an RCD reduces the risk of injury. Always wear appropriate e) When operating a power tool outdoors, d) Store idle power tools out of the reach of the risk of electric shock. - Page 6 Use of the power tool for radiators, ranges and refrigerators. There avoided. Loose clothes, jewellery or long hair can Exact Tools products are factory-tested; if this Avoid prolonged contact with dust from power situations. operations different from those intended is an increased risk of electric shock if your tool does not operate, check the power supply.
-
Page 7: Operation
The yellow mark of the UNLOCK button Check that the blade holder and the blade tips two supports (Fig B) that are supplied with the at the installation site. The PipeBevel 220E/360E The Exact PipeBevel 220E/360E Pipe on the two supports (Fig B) that are supplied at the installation site. -
Page 8: Operation
bevelling. If there are some problems during the bevelling process - abnormal sounds or vibrations due to which you have to interrupt bevelling before Operation Operation english the pipe end is ready. Release the cutting head english Operation english by pushing the UNLOCK button forward until the UNLOCK button is released, and lift the When the pipe is beveled to the desired level, push the Fig K... -
Page 9: Replacing New Cutting Tips / Turning Sharp Edges Of The Cutting Tips
Term at our discretion we will repair the Exact the gripper’s trapezoidal screw (Fig N/3) and the o u r discretion we will repair the Exact product o r two worm screws on it (Fig N/4). product or supply an entirely new or factory two worm screws on it (Fig N/4). - Page 10 Note: The Exact product is to be shipped to Do not overload the saw by cutting continuously. Note: The Exact product is to be shipped to the You can easily repeat desired bevel depth with the Authorized Warranty Repair Center freight The saw will be overheated and the metal parts Authorized Warranty Repair Center freight prepaid.
- Page 11 Exact Tools Oy Särkiniementie 5 B 64 00210 HELSINKI FINLAND Tel + 358 9 4366750 FAX + 358 9 43667550 exact@exacttools.com www.exacttools.com...
Need help?
Do you have a question about the PipeBevel 220E and is the answer not in the manual?
Questions and answers