Advertisement
PRODUCT DESCRIPTION ///
The Xanboo
™
Door/Window Sensor allows for convenient placement. Using a magnetic
force field created between the sensor and a magnetic contact you can secure household doors,
office doors, file cabinets or windows.
PACKAGE CONTENTS ///
(1) Door/Window Sensor
I
(1) Magnetic Contact
I
(1) Hardware Kit
I
(1) Installation Guide
I
DOOR/WINDOW SENSOR
MAGNETIC CONTACT
HARDWARE KIT
CONNECTING TO THE GATEWAY ///
DISCOVERING NEW DEVICES
In order for the Gateway to control Xanboo devices such as cameras and sensors, each device must be
registered with the Gateway . The iG3 Gateway establishes a "secure wireless network" between itself
and all discovered Xanboo devices. The Gateway can only control devices that it has discovered.
New devices can be discovered at any time:
A. Log into the iG3 using 'XANASSIST'
B. Click on the 'DISCOVERY' menu option
C. Click the 'START DISCOVERY' menu item, on the left,
Door/Window
to begin discovery for your
D.
At this time, using a paper clip, press the
'DISCOVERY' button on the back of your Door/
Window Sensor. The light on the device will turn
green when the Gateway has discovered it properly.
NOTE: After a brief period, the LED will turn off. The LED is only Green when transmitting. The LED is
not 'lit' during sleep mode (waiting for the next time to transmit a signal).
Sensor.
I
E.
Go back to your PC and confirm that the device has been discovered and displayed.
SETUP WIZARD DEVICE DISCOVERY (IN PROGRESS) PAGE
F. Click on the 'STOP DISCOVERY' menu option when you are finished discovering all of your devices.
G. The Gateway and devices are now ready to be used.
ADDITIONAL NOTES
A. This page will refresh every 10 seconds to show newly discovered devices. You may have to
wait for a refresh to see the device listed.
B. The Gateway will automatically stop discovery after 10 minutes or if you browse off the page
C. New devices can only be discovered when the Gateway has an active Internet connection
(ie. your Gateway is connected to the internet).
MOUNTING ///
The Xanboo
™
indoor or sheltered
MOUNTING HOLE
base and the magnetic contact. When there is a change in status, either opening or closing, the
will trigger an event to the Gateway. The spacing between the
between 1/10 inch and .5 inch.
MOUNTING HOLE
NOTE: The Door/Window Sensor cannot be used on metal doors, metal door frames or metal objects.
DEVICE DISCOVERY
BUTTON
1. Peel the paper strip from the double-sided tape located on the back of the Sensor.
You can also mount the sensor more securely using the screws in the hardware kit.
Using the drilling template on the back of the instruction guide, drill two small holes for
the screws. Affix the screws to one side of the object (typically the "stationary" side) leaving
1/16" space between the screw head and the object,
2. Mount the Sensor onto the screws and slide down to lock into place
3. The magnetic contact should now be placed on the other side of the object (typically the
side that moves)
Door/Window Sensor is constructed of UV resistant ABS plastic allowing for
outdoor use. The
Sensor
works by creating a magnetic field between the
2
Sensor
Sensor
Sensor
and the contact should be
Advertisement
