Front Rigging; Installing Swingaway Footrest Assembly - Probasics 9200 Operator's Manual
Transport chairs, 17"/19"/21" burgundy/green/blue/black lightweight aluminum, 19" grey/green plaid upholstery lightweight aluminum transport chair, burgundy/black 19" lightweight aluminum transport chair w/rear cable hand brakes, burgundy/black 22" heavy
Table of Contents
Advertisement
FRONT RIGGINGS
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure all
attaching
hardware is tightened securely. Otherwise, injury or damage may result.
Installing Swingaway Footrest Assembly
1. Turn the footrest to the side (open footplate is perpendicular to wheelchair).
2. Install the hinge plates on the footrest onto the hinge pins on the wheelchair frame.
3. Push the footrest towards the inside of the wheelchair until it locks into place.
NOTE: The footplate will be on the inside of the wheelchair when locked in place.
4. Repeat this procedure for the other footrest assembly.
5. To release the footrest, push the footrest release lever inward, rotate the footrest
outward.
19
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 9200 and is the answer not in the manual?
Questions and answers