Asus Motherboard P4B-E User Manual page 53

8. ASUS EZ Plug™ and power connectors
(20-pin ATXPWR, 4-pin ATX 12V, 4-pin AUX+12V)
These connectors connect to an ATX 12V power supply. The plugs from
the power supply are designed to fit these connectors in only one
orientation. Find the proper orientation and push down firmly until the
connectors completely fit.
In addition to the 20-pin ATXPWR connector, this motherboard requires
that you connect the 4-pin ATX 12V power plug to provide sufficient
power to the CPU.
If you are using a standard ATX power supply that does not have the
ATX 12V plug, connect one 4-pin device power plug to the ASUS EZ
Plug™ connector labeled AUX +12V.
Make sure that your ATX 12V power supply can provide 8A on the
+12V lead and at least 1A on the +5-volt standby lead (+5VSB). The
minimum recommended wattage is 230W, or 300W for a fully
configured system. The system may become unstable and may
experience difficulty powering up if the power supply is inadequate.
®
P4B-E ATX & Auxiliary Power Connectors
Figure 2-42 Power Supply Connectors
ASUS P4B-E motherboard user guide
ATXPWR
Pin 1
+12.0VDC
+5VSB
PWR_OK
COM
+5.0VDC
P4B-E
COM
+5.0VDC
COM
+3.3VDC
+3.3VDC
ASUS EZ Plug™
(AUX+12V)
+5.0VDC
+5V
+5.0VDC
GND
-5.0VDC
GND
COM
+12V
COM
COM
PS_ON#
ATX12V
COM
-12.0VDC
+12V DC COM
+3.3VDC
+12V DC COM
2-31