ProChip M-Ped-SE Owner's Manual

- For e-bikes and pedelecs with the BionX drive system -
Please read these instructions carefully before using the M-Ped-SE device !
The activation of this device will void the manufacturer's warranty.
Please note the legal regulations: This device is only to be used for sport or competition
purposes. Once the M-Ped-SE system is activated, the bike must not be used on the road !
The actual achievable speed depends on the type of BionX system on the bicycle.

Connecting the M-Ped-SE to the bike:

- Locate the connector plug on the BionX cable near the Console or Motor.
- Remove the shrink tubing on the cable plug
- Disconnect the cable (slide back the connector sleeve on the plug, then pull the connector
apart)
- Connect the M-Ped-SE to the bike cable plug.
- Press the Start button on the BionX Console.
- See a video on YouTube at:
After switching the unit on, the following information is displayed on the M-Ped-SE screen:
- Firmware version (of the M-Ped-SE )
- Limit: xx / Free : xx ( limit : xx = number of possible Bikes / Free: xx = Remaining bikes)
Diese Bedienungsanleitung ist Eigentum der Fa. ProChip. Sie wird Kunden und Wiederverkäufern der Fa. ProChip kostenlos
zur Verfügung gestellt. Jede Vervielfältigung oder Modifikation, Weitergabe, Digitalisierung oder Abänderung zur
Eigenverwendung ist ohne schriftliche Erlaubnis der Fa. ProChip verboten.
Owners Manual M- Ped-SE
http://www.youtube.com/watch?v=OsKpRP19I6Q
Stand: 08.04.2018
© 2013 by ProChip
V2.04 Page 1 von 7
"OK" Button:
With the OK button confirm or select
a function.
"ESC" Button:
With the ESC button cancel an
operation.
"UP" Button:
With the UP button scroll forward in
the menu.
"DOWN" Button:
With the DOWN button scroll
backwards in the menu.