Download Print this page

Tech Works ICR-116 Installation Manual page 7

Intercom relay 16 channel

Advertisement

DODC-1 - Operator Desk Console - This all steel console with brushed stainless
steel faceplate and vandal resistant push buttons has an epoxy finished cold rolled
steel base, a permanently attached gooseneck microphone provides clear, high
quality page and intercom talk while a vandal resistant 3 inch speaker provides clear
listening.
DODC-2 - Operator Desk Console - This all steel console with brushed stainless
steel faceplate and vandal resistant push buttons has an epoxy finished cold rolled
steel base, a hidden flush mount microphone provides clear, high quality page and
intercom talk while a vandal resistant 3 inch speaker provides clear listening.
ICA-202D - Intercom Amplifier - 20 watts of clean audio power at 25-Volts it can do
both the Intercom and most Paging functions. Automatic Level Control (ALC)
assures the speaker level remains constant over a wide dynamic input range.
RC-24-* and RC-BB-24 - 24-pin Ribbon Cable and Breakout Board - Designed to
connect our Tech Works Intercom Relay panels with digital control equipment. The
RC-24-* is available in various lengths (10 feet standard). The breakout board has
mounting tabs for screw mounting wherever convenient.
ICR-44 - Intercom Relay Module 4x4 - Tech Works makes a variety of intercom
Relay modules for routing audio and calls in signals. The ICR-44 is a snap track
mount 4 relay assembly designed to allow multiple master audio routing by a PLC.
VPSS - Vandal Proof Speaker Station - a call-in station with integral
speaker/micro- phone and momentary, normally open, push-to-call button. The
faceplate is a 2 gang electric box mount, 12 gage, brushed stainless steel with
security screens mounted between the faceplate and the loudspeaker. Tamper-
resistant hardware is included.
PA-402 Paging Amplifier - designed to add Power to the ICA-202D. It delivers 40
Watts to 25 Volts loads at very low noise and distortion. Perfect for Prisons or
Security applications when covering large areas or All Page.
PS2437A - Power Supply - 24V DC @ 3.7 Amps - is a regulated computer grade
power supply. This unit is UL listed and includes a 6-foot removable power cord with
a North American standard Edison connector. Includes wall mount bracket.
Visit
www.tech4people.com/catalog/products
accessories. If you don't see something that you need be sure to contact us, we regularly fill special
request orders.
System Accessories
for a catalog of all Tech Works products and
06/2016

Advertisement

loading