Barcode Scanning; Using The 1D Barcode Scanner - Linea Tab Mini series User Manual

1 DATECS Linea TAB Mini
`

Barcode Scanning

Using the 1D barcode scanner:

The Linea TAB Mini 1D uses a scan engine that supports one-dimensional
(1D) barcode symbols. The effective reading distance of the barcode reader varies
depending on the barcode size.
Scanning 1D Barcodes:
To scan a 1D barcode, first activate the scanner. Then position the scanning
head as close as possible to the barcode label so that the scan line crosses both
ends of the barcode as shown on the figure below.
Slowly pull back the unit, while increasing the distance between the barcode
and scanning head, until the barcode has been read by the scanner.
Reading distance is depend
Linea TAB Mini supports different types of scan:
- Single Scan
- Multi Scan
of the barcode size
Scan Button
14
User manual