Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Deluxe Manuals
  4. Fitness Electronics
  5. T9250
  6. Service manual

Deluxe T9250 Service Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
T9250(Deluxe console)
SERVICE MANUAL
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the T9250 and is the answer not in the manual?

Questions and answers

Summary of Contents for Deluxe T9250

  • Page 1 T9250(Deluxe console) SERVICE MANUAL...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS CHAPTER 1: SERIAL NUMBER LOCATION CHAPTER2: USING THE CONSOLE AND PROGRAM DESCRIPTION 2.1 Console Description 2.2 Program Information 2.3 USING YOUR CD / MP3 PLAYER 2.4 Demo Mode CHAPTER 3: ENGINEERING MODE 3.1 Engineering Mode 3.2 Engineering Mode Overview CHAPTER 4: ERROR CODE CHAPTER 5: TROUBLESHOOTING 5.1 Electrical Diagram...
  • Page 3 CHAPTER1:Serial Number Location 1.1 Serial Number Location...

  • Page 4: Chapter2: Using The Console And Program Description

    CHAPTER 2: Using the Console and Program Description 2.1 Console Description Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. (details see the OM) CHAPTER 3: ENGINEERING MODE 1) To enter Engineering Mode, press &...
  • Page 5 MODE FUNCTION DESCRIPTION ENG 1 CONFIGURATION P2:MIN SPEED RPM P3:MAX SPEED RPM P4:MIN ELEVATION P5:MAX ELEVATION P6:UNITS P7:MAX PROGRAM TIME P8:DEFAULT WEIGHT P9:ACCUMULATED TIME P10:ACCUMULATED DISTANCE P11:BELT THICKNESS P12:ROLLER DIAMETER P13:ELEVATION DIRECTION P14:PAUSE TIME P15:DEFAULT TIME P16:DEFAAULT AGE P17:DISABLE BEEP P18:SET LANGUAGE P19:ELEVATION ERRORS P20:EXIT ENG1...
  • Page 6 Figure A...

  • Page 7: Chapter 4: Error Code

    CHAPTER 4: ERROR CODE Error code table： Error Code Error code description Simple:E4 No elevation moves Deluxe and Premier: E4 No Elevation movement Simple:E6 elevation connector falling off or hasn't Deluxe and Premier: E6 Elevation Lost been connected Simple: E7...

  • Page 8: Electrical Diagram

    CHAPTER 5: TROUBLESHOOTING 5.1 Electrical Diagram...
  • Page 10 5.2.1 NO POWER TO THE CONSOLE 1) SYMPTOM: a. The power switch is in the on position, but the console will not turn on. 2) SOLUTION: a. Check to see if the power switch is lit. If it is not, try a different outlet. If the power switch still does not light up with a known good outlet, replace the power switch.
  • Page 11 If output is around DC 12V, check the console cable. If it is defective, replace the console cable. If the console cable connections are all good, replace the PCB. 5.2.2 NO CONSOLE RESPONSE 1) SYMPTOM: a. The power is on and the console lights up, but the treadmill does not run when keys are pressed. 2) SOLUTION: a.
  • Page 12 “ENTER” first and then the key ”START”, Press the key “INCLINE ▲/▼” If can hear beeps from two relays (Figure D) at the MCB, the MCB is ok, replace the elevation motor. If there is no beeps from these two relays, MCB is defective and replace the MCB. Figure D If the console display “E4”...
  • Page 13 5.2.5Communication Error 1) SYMPTOM: a. The treadmill display”E10” 2) SOLUTION: a. First replace the console wire. b .Second replace the MCB. c. Third replace the console.